On the pass side of my engine mounted on the frame beside the shock tower are 2 turn screws that have a metal braided line and one goes to the turbo and the other goes to the 1in metal pipe running down the side of the oil pan . Any idea what they do ? They turn either way left or right .
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
? What do the 2 screw valves do ?
- Thread starter chucky
- Start date
Ronmar
Well-known member
- 3,848
- 7,483
- 113
- Location
- Port angeles wa
Oil sample ports. One is connected to the oil cooler on the engine, and the other is connected to the transmission oil line running to the oil cooler. They are push buttons, start the engine, remove the little screw caps and push the disc and oil will flow out the ports
- 2,038
- 5,227
- 113
- Location
- Portland, OR
AOAP sample valves.
Well thank you that makes sense being they were single line to each location but i never would have guessed it was there to take oil samples !Oil sample ports. One is connected to the oil cooler on the engine, and the other is connected to the transmission oil line running to the oil cooler. They are push buttons, start the engine, remove the little screw caps and push the disc and oil will flow out the ports