Potluckslammy
Member
- 55
- 75
- 18
- Location
- Umpire, AR
Anybody know the dimensions for this little gem? All the black coating has cracked and blow off the insulation blanket, which I would like to take off and recoat. And there is rust-through beginning to show on the split steel hood, which will need repair.
I have the part number for the rivet, which is 12448964. Doing a search, it shows up in some aerospace parts houses, but only option is to request a quote. Also, yes I know they're available as N.O.S. from one of the MV parts suppliers...but $1 a piece makes my butt cheeks clench!
Figured something suitable can be sourced from some place like McMaster if I could get a measurement. Suppose if worse comes to worse I'll just have to cut one off and measure it.![Downcast face with sweat :sweat: 😓](https://cdn.jsdelivr.net/gh/joypixels/emoji-assets@5.0/png/64/1f613.png)
I have the part number for the rivet, which is 12448964. Doing a search, it shows up in some aerospace parts houses, but only option is to request a quote. Also, yes I know they're available as N.O.S. from one of the MV parts suppliers...but $1 a piece makes my butt cheeks clench!
Figured something suitable can be sourced from some place like McMaster if I could get a measurement. Suppose if worse comes to worse I'll just have to cut one off and measure it.
![Downcast face with sweat :sweat: 😓](https://cdn.jsdelivr.net/gh/joypixels/emoji-assets@5.0/png/64/1f613.png)