Gamagoat1
Active member
- 745
- 43
- 28
- Location
- Kiowa, Colorado
Thank You!!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
I have joined the Goat herd
- Thread starter combat32
- Start date
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
This quick disconnect on the brake line between tractor and carrier, does it serve as like a proportioning valve? Or does it just shut off the flow of brake juice when disconnected?
Attachments
Gamagoat1
Active member
- 745
- 43
- 28
- Location
- Kiowa, Colorado
Just a disconnect/shutoff.
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Thanks, so it should open and close then, mine is stuck shut, got it full of kroil, hopefully it will loosen up
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Ground is too wet to do much here today, so I decided to try and free up my truss kit. I picked up an almost complete set a few years ago and they were rusted shut.
I was able to free up everything except the brace, she snapped off not sure how I will fix that. Anyone seen a spare brace floating around anywhere? I still need to pick up a couple quick disconnect pins and the heim joints that go at the bottom.
I was able to free up everything except the brace, she snapped off not sure how I will fix that. Anyone seen a spare brace floating around anywhere? I still need to pick up a couple quick disconnect pins and the heim joints that go at the bottom.
Attachments
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Got my new bearing today, good to go, measures out exactly same as old one. If you are needing one or would like to replace yours for peace of mind order away.
Attachments
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Headed to Texas next weekend to pick up 5 more good used tires, thanks to some members on SS, they were hauled from Phoenix area to Austin for me, one looks like a European tread design, wonder if this style is a recap done in Germany?
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
A picture of the pile
Attachments
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Tires are home, loooong trip to Austin and back to my house but made a small weekend vacation out of the deal, got 5 decent used tires, good to go on the back of the goat or for spare tire. Big thanks the G744 for letting me have them.
Attachments
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
A couple of my wheels are stamped inside Sankey England, never noticed it before , also most of the wheels in my pile have no stamping at all. Were these early goat wheels? Later wheels made for the Army in Europe?
Attachments
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Some wheel prep here, gonna try to get at least 2 mounted today
Attachments
SgtMajHarper
Well-known member
- 297
- 574
- 93
- Location
- Falcon, CO
Today I painted my rims for the new recap tires I bought a while back, got 3 of them swapped out on the truck. I checked the rims and all 6 were marked Sankey England, 5 of them an A/71 stamp, 1 with a G/69 stamp.
SgtMajHarper
Well-known member
- 297
- 574
- 93
- Location
- Falcon, CO
I got the other 3 on the Goat today, while working on the rear end I noticed the shocks were made in Canada.....may as well be since the rims are from England.....guess I didn't realize we did that much out sourcing on US built in the 70's.
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
I didn't know that either, I googled Sankey, still making wheels but owned by another company. They were the first company to produce a one piece steel wheel, prior to 1910, can't remember the exact date.
Wasn't the t case produced by an English company as well?
Wasn't the t case produced by an English company as well?
SgtMajHarper
Well-known member
- 297
- 574
- 93
- Location
- Falcon, CO
I wouldn't know about who made what parts, betcha GamGoat1 might know...he's the only "Goat Whisperer" I know. I have however given a few parts I was working on my own personal pet name as I busted knuckles or couldn't reach something, thought they were all made in HE double toothpicks.
PointnShoot4WD
Member
- 150
- 12
- 18
- Location
- BNE, Oz
From memory the LVT history page at sgaama tells of a change from US to UK transfer case, heard a rumour it was Bedford sourced but never been able to confirm. Sounds semi legit as Bedford were GM owned.
Spock
SgtMajHarper
Well-known member
- 297
- 574
- 93
- Location
- Falcon, CO
I have multiple strikes against me for working / operating these beasts. I'm tall, uncoordinated anyway, fatter than I should be, old and broken up: I have considered charging for admission for people to watch me ass-in and un-ass the vehicle. Watching and listening to me work on it would have to be rated R minimum and not for small children and those with weak hearts.
That’s the spirit!