Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Are you going to install a factory aluminum m1152 2-door roof or a steel 4 door roof (as in your pic) ? They use totally different parts. The steel roofs will hook up to sponsons in the c-pillar.My m1152 has hardtop windshield mounts, and I'm looking at installing factory hardtop no turret as in picture. I have done searches for hmmwv hardtop c pillar but can't find any info other than slantback hardtop mounts. Anyone have a part number for a hardtop c pillar without slantback? Or do you use the soft top c pillar?
Steel 4 door top. What c pillar goes with that top. I am also looking for rear curtain but saw that black dog customs makes a fiberglass rear curtain that looks factory.
That m1165 roof is totally different than the steel m1026 style. The steel roof may mount to that back wall, but you are mixing parts from different models. That can get expensive if it doesnt fit.Like this.
That clears it up. So the steel roof I posted is for the slantback? They didn't make a pillar for that roof?
It would be the gmv or special forces style with a tubular sloped bar to the fender top. Or the style with slats. You can find pics online.
Do you know who sells that top? Part numbers?
This was an original civilian H1 HMC4 top repurposed and stripped down by Uncle Sam. HMC4 civilian tops can be had for at least $5K, or so I am told.
I also have a 1152 and want to put a oem hard roof but want to make sure I can get all the parts. I like both systems
