M1152 Hardtop install?

[Mattguy]

My m1152 has hardtop windshield mounts, and I'm looking at installing factory hardtop no turret as in picture. I have done searches for hmmwv hardtop c pillar but can't find any info other than slantback hardtop mounts. Anyone have a part number for a hardtop c pillar without slantback? Or do you use the soft top c pillar?

 

[Action]

My m1152 has hardtop windshield mounts, and I'm looking at installing factory hardtop no turret as in picture. I have done searches for hmmwv hardtop c pillar but can't find any info other than slantback hardtop mounts. Anyone have a part number for a hardtop c pillar without slantback? Or do you use the soft top c pillar?

Are you going to install a factory aluminum m1152 2-door roof or a steel 4 door roof (as in your pic) ? They use totally different parts. The steel roofs will hook up to sponsons in the c-pillar.

 

[Mattguy]

Are you going to install a factory aluminum m1152 2-door roof or a steel 4 door roof (as in your pic) ? They use totally different parts. The steel roofs will hook up to sponsons in the c-pillar.

Steel 4 door top. What c pillar goes with that top. I am also looking for rear curtain but saw that black dog customs makes a fiberglass rear curtain that looks factory.

 

[Mattguy]

This is what I'm trying to find part numbers for.

 

[Mattguy]

Like this.

 

[Action]

Like this.

That m1165 roof is totally different than the steel m1026 style. The steel roof may mount to that back wall, but you are mixing parts from different models. That can get expensive if it doesnt fit.
The m1165 rear wall is the c-pillar.

 

[Mattguy]

That m1165 roof is totally different than the steel m1026 style. The steel roof may mount to that back wall, but you are mixing parts from different models. That can get expensive if it doesnt fit.
The m1165 rear wall is the c-pillar.

That clears it up. So the steel roof I posted is for the slantback? They didn't make a pillar for that roof?

 

[Action]

That clears it up. So the steel roof I posted is for the slantback? They didn't make a pillar for that roof?

It would be the gmv or special forces style with a tubular sloped bar to the fender top. Or the style with slats. You can find pics online.

 

[Mattguy]

It would be the gmv or special forces style with a tubular sloped bar to the fender top. Or the style with slats. You can find pics online.

Think I found it.

 

[DLippert]

What roof/top part number goes with the m1165 rear curtain?

 

[TOBASH]

My M1165 has a Hummer HMC4 top. Others have the top and rear curtain as posted.

My point is that there are at least two iterations. Make sure you get parts for one and only one version.

 

[DLippert]

My M1165 has a Hummer HMC4 top. Others have the top and rear curtain as posted.

My point is that there are at least two iterations. Make sure you get parts for one and only one version.

Do you know who sells that top? Part numbers?

 

[TOBASH]

Do you know who sells that top? Part numbers?

This was an original civilian H1 HMC4 top repurposed and stripped down by Uncle Sam. HMC4 civilian tops can be had for at least $5K, or so I am told.

No idea about military part number, but I bought this rig from RWH, and he might have a better idea of where to look for part numbers. (Thank you RWH for the amazing support!)

I have not yet started looking for ECV RevA supplemental TM’s.

 

[DLippert]

Do you know who sells that top? Part numbers?

I also have a 1152 and want to put a oem hard roof but want to make sure I can get all the parts. I like both systems

 

[TOBASH]

There is another option…

Hummer H1 just went out and bought Aluminum and made a custom top. Looks amazing. He frequently posts pictures, so I will copy one below. He made a flying nun style roof.

You can also fabricate a roll cage and then attach a custom top. Probably save thousands.