DueceriderA2
Member
- 12
- 31
- 13
- Location
- NH
Three tubes of grease so far, found the fuses are crap so I ordered more. I think I may need a new hand throttle lever, feels like mine is stripped out. Love this thing!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
FLU419 SEE HMMH HME Owners group
- Thread starter Migginsbros
- Start date
- 3,341
- 1,328
- 113
- Location
- The actual midwest, NM.
Nice! Is that the clean one that sold recently on auction?
Migginsbros
Well-known member
- 2,204
- 6,701
- 113
- Location
- Berlin-Germany
@ DueceriderA2
Nice one, but we´ve never tried to cover the right stabilizer with the bucket!?
DueceriderA2
Member
- 12
- 31
- 13
- Location
- NH
Yes sir! I was very fortunate, I don’t think anyone seriously looked at it. It’s in super shape!
DueceriderA2
Member
- 12
- 31
- 13
- Location
- NH
I couldn’t figure out what you meant at first, LOL! I was in the process of moving it around and pulling some stumps so I just pulled up the stabilizers, swung the bucket so I could see and went for it!@ DueceriderA2
Nice one, but we´ve never tried to cover the right stabilizer with the bucket!?
DueceriderA2
Member
- 12
- 31
- 13
- Location
- NH
Anyone have a suggestion about a hand throttle that moves an entire 180 degrees and fails to keep a constant throttle level? I have applied penetrating oil and it has started to get better. I have looked at the schematics and am Trying to figure it out. Any help is greatly appreciated!
MajorMogger
Member
- 47
- 50
- 18
- Location
- Texas
Looks great! Welcome!
- 7,716
- 19,766
- 113
- Location
- Charlotte NC
.
Keep pumping the cable on both ends with penetrating oil.
It will eventually improve.
fredactual
New member
- 2
- 6
- 3
- Location
- roanoke, va
I hate to resurrect a old posting. I am cleaning out a old saw dealer in Va. I have 3 bars I can't identify but when I google them it links back to this forum thread.
160atsa195 is the bar part number oregon is the mfg.
Anyone still looking for some? I have 3 I'd love to move.
It looks like they may fit the old military hydraulic saws
160atsa195 is the bar part number oregon is the mfg.
Anyone still looking for some? I have 3 I'd love to move.
It looks like they may fit the old military hydraulic saws
glcaines
Well-known member
- 3,914
- 2,594
- 113
- Location
- Hiawassee, Georgia
I was looking for one a while back and gave up. Oregon no longer manufactures the 160ATSA195. I ended up purchasing an Oregon 160PXDK095, which is a commercial replacement for the 160ATSA195. You should place an ad in the Parts For Sale forum. I would also place an ad on Ebay. How much as you asking for the bars?
fredactual
New member
- 2
- 6
- 3
- Location
- roanoke, va
I posted them in the classified section. I'm burning up this site trying to fix a M1008 and don't want to incur the wrath of the Mods 
VA - Oregon Chainsaw Bars may fit FLU419
160ATSA195 Oregon Bars have 3. Boss lady would like $20 each or all 3 for $50. We can ship via usps from Covington VA 24426
www.steelsoldiers.com
DueceriderA2
Member
- 12
- 31
- 13
- Location
- NH
Thank you! It seems to be working better and I tried some Kroil which really seems to make a difference. Thanks for the help! Got the rear switches working on the hoe which is a HUGE help! Also found that the hour meter is 44, white four and a red four so I was very pleased to have found that! May have smoked one of the hydraulic cooling fans that apparently was sized up. Hoping it will come back to life. Such a cool rig and really interesting to work-on! Everyone here is super helpful and I am hoping to return the favors at some point!
- 3,341
- 1,328
- 113
- Location
- The actual midwest, NM.
Today I fired up the former Summer SEE, now the main one, to install tire chains while it's still nice out.
It just made me very happy to hear it purr. Three of the four cylinders on the backhoe were replaced when I got it, and almost all the hoses. Actually, almost everything on it was it great shape when I got it, but it sure didn't (and doesn't) look nice. It didn't come with any tools, but did have a ripper.
Yeah, getting the fuel system straightened out was a bit of a chore with this one as the inside of the tank looked like the bottom half had bed liner applied (it was bacteria). And there were other odds and end that needed to be fixed, but still.
This thing was bought to be a parts car, but turned out to be more mechanically sound that the Winter SEE it was meant to provide parts for.
Best of all, the $5,000 price. No wonder I like it so much.![DSCN4629[1].JPG](https://www.steelsoldiers.com/data/attachments/639/639469-1aadcdab3d4be7d5faa42dda59c043b0.jpg "DSCN4629[1].JPG")
![DSCN4630[1].JPG](https://www.steelsoldiers.com/data/attachments/639/639470-0992136d9f643230372a48521efde256.jpg "DSCN4630[1].JPG")
It just made me very happy to hear it purr. Three of the four cylinders on the backhoe were replaced when I got it, and almost all the hoses. Actually, almost everything on it was it great shape when I got it, but it sure didn't (and doesn't) look nice. It didn't come with any tools, but did have a ripper.
Yeah, getting the fuel system straightened out was a bit of a chore with this one as the inside of the tank looked like the bottom half had bed liner applied (it was bacteria). And there were other odds and end that needed to be fixed, but still.
This thing was bought to be a parts car, but turned out to be more mechanically sound that the Winter SEE it was meant to provide parts for.
Best of all, the $5,000 price. No wonder I like it so much.
glcaines
Well-known member
- 3,914
- 2,594
- 113
- Location
- Hiawassee, Georgia
That thing would look almost new with a little paint. What does the interior look like? Mechanicals are the most important. If it runs great, that's 95%.
- 3,341
- 1,328
- 113
- Location
- The actual midwest, NM.
It looks like they got done with the rehab, but never got to the paint part. Which is fine with me. It came with a surface rusted hood (no paint whatsoever) but I saved that one for an HMMH. The 'glass hood is plenty good for this FLU, and I must've had more green than tan when painting it.
Which is probably why the wheels are green, too.
There's a small rip in one seat, otherwise the interior is also good. And what I really like about it is that the backhoe is tighter than on the Winter SEE, and the loader is much stronger.
Which is probably why the wheels are green, too.
There's a small rip in one seat, otherwise the interior is also good. And what I really like about it is that the backhoe is tighter than on the Winter SEE, and the loader is much stronger.
DueceriderA2
Member
- 12
- 31
- 13
- Location
- NH
That is awesome! Did you fab the skid steer quick attach? I was seriously interested in doing that on mine. Nice collection!
- 3,341
- 1,328
- 113
- Location
- The actual midwest, NM.
Thanks, Duecerider.
No, the quick tach setup was bought from palletforks.com, then just modified a bit to fit the loader. It was primarily installed to be able to run the snow blower, but is obviously useful for all kinds of attachments.
brandan34
Member
- 45
- 37
- 18
- Location
- Southern Oregon
Brandan Topham in Sprague River Oregon, 205-8837 Where on the frame do I go for that number? I got a FLU that was little better than for parts and I am working on getting it going. While I knew it was in bad shape I did not expect major engine or trany problems. I am currently going through both as they have problems. It has been a fun project so far.
Area code is five for one
Area code is five for one
Last edited:
glcaines
Well-known member
- 3,914
- 2,594
- 113
- Location
- Hiawassee, Georgia
What number are you looking for on the frame?
brandan34
Member
- 45
- 37
- 18
- Location
- Southern Oregon
In the first post on this thread it says "
Post name, Town, State, country, email, phone,first 9 digit of frame no. or what you think/like to build a network of
FLU419 owners. "