- 2,034
- 5,224
- 113
- Location
- Portland, OR
I called this morning and was told that production was at lunch and I would get a call back but that did not occur today. She did say she had a shipping request quote on her desk so that's positive.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
!CLOSED! Cab Mount Group Buy. NEW OEM FMTV LMTV M1078, M1079, etc
- Thread starter GeneralDisorder
- Start date
- 2,034
- 5,224
- 113
- Location
- Portland, OR
She never called me back and I haven't called them again. I'll try to find a minute tomorrow. It's hard because I'm short staffed at work (tech's out sick) and they are east coast so I have to call before 2pm
- 2,034
- 5,224
- 113
- Location
- Portland, OR
The mounts are shipping from the manufacturer tomorrow morning! Shipping from the manufacturer is going to add $1.50 per mount, so $6 per set. They are coming from the other side of the USA to me (OR) so I'm guessing at least a week transit time. Then I'll have pics of the final products, etc.
STI2NR
Member
- 21
- 29
- 13
- Location
- Scappoose Oregon
- 2,034
- 5,224
- 113
- Location
- Portland, OR
If you want to do local pickup if you are in Portland you could stop by my shop and pay cash or card, etc. Or I'll be accepting PayPal for shipping USPS flat-rate once I get the logistics of that figured out and which boxes and such are going to fit the job.
STI2NR
Member
- 21
- 29
- 13
- Location
- Scappoose Oregon
Shipping is fine. Let me know so I can pay you
ramdough
Well-known member
- 1,554
- 1,729
- 113
- Location
- Austin, Texas
STI2NR
Member
- 21
- 29
- 13
- Location
- Scappoose Oregon
Same!
- 554
- 1,041
- 93
- Location
- Cool, CA
Anxiously awaiting to see if there are some available for those of us that did not get in on the initial order.
second this
- 2,034
- 5,224
- 113
- Location
- Portland, OR
I installed a set on my rear A1R cab latch to evaluate and I'm pleased with the results over the last few weeks.
The locating ring on the bottom of the large mount is a bit shorter than the original, but this does not affect their operation. It's only there to center them during installation and is irrelevant once the bolts are torqued.
I am awaiting my order of USPS Priority Mail medium boxes for shipping out all of these mounts. Tonight I will send PM's to all participants with payment information. With packing material the shipping is going to be $20 for simplicity. For those that need two sets - they will both fit in the same box saving on shipping!
Final Pricing:
One Set (A0,A1): $134
Two Sets (A1R): $248
The locating ring on the bottom of the large mount is a bit shorter than the original, but this does not affect their operation. It's only there to center them during installation and is irrelevant once the bolts are torqued.
I am awaiting my order of USPS Priority Mail medium boxes for shipping out all of these mounts. Tonight I will send PM's to all participants with payment information. With packing material the shipping is going to be $20 for simplicity. For those that need two sets - they will both fit in the same box saving on shipping!
Final Pricing:
One Set (A0,A1): $134
Two Sets (A1R): $248
Last edited:
- 1,813
- 1,518
- 113
- Location
- Orlando, FL
They ended up not making them from the original molds?
Third From Texas
Well-known member
- 2,766
- 6,498
- 113
- Location
- Corpus Christi Texas
I always thought that end was milled down. But as he said, I think it's just a stabilizer to keep it square when you run the bolt thru.
- 2,034
- 5,224
- 113
- Location
- Portland, OR
They had "drawings" - remember they last made these in 2005. They had to create new tooling.
And as Third notes - it's only there to facilitate centering.
Last edited:
- 2,034
- 5,224
- 113
- Location
- Portland, OR
Everyone in line for the first 50 sets should have a PM with payment instructions. If I don't receive payment in 10 business days I will put those sets back up for grabs.
And yes - additional sets were made in case anything goes wrong in shipping, etc. I anticipate that those who have expressed ongoing interest will get to participate once we ensure the initial orders were fulfilled.
And yes - additional sets were made in case anything goes wrong in shipping, etc. I anticipate that those who have expressed ongoing interest will get to participate once we ensure the initial orders were fulfilled.
- 554
- 1,041
- 93
- Location
- Cool, CA
Thanks...interested when extras are identified.
- 2,034
- 5,224
- 113
- Location
- Portland, OR
My priority mail flat rate boxes will be arriving tomorrow according to tracking so everyone that gets their payment in before tomorrow when I go to the PO will get mounts shipped.
- 2,034
- 5,224
- 113
- Location
- Portland, OR
First round of shipments complete. Shipping completed for the following members:
@STI2NR
@INFChief
@Ronmar
@shawnspeak
@johnz
@FHIV
@BKubu
@Godspeed131
@tennmogger
@ramdough
@Wingnut13
@B-Dog
@Poolboy 7631
I have arrangements as well for:
@jtcawrse
@coachgeo
@Lostchain
If you're not listed you have 8 business days to get in touch with payment.
Thanks to everyone!
@STI2NR
@INFChief
@Ronmar
@shawnspeak
@johnz
@FHIV
@BKubu
@Godspeed131
@tennmogger
@ramdough
@Wingnut13
@B-Dog
@Poolboy 7631
I have arrangements as well for:
@jtcawrse
@coachgeo
@Lostchain
If you're not listed you have 8 business days to get in touch with payment.
Thanks to everyone!