• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Diagnostic port

grywitt

Active member
Steel Soldiers Supporter
147
105
43
Location
Nm
I have been looking through some of these TMs and they are awesome but I am struggling to find a good list of what is wired to where in this plug. I ran across one post where Guyfang told someone to test from pin.. to gnd and check the reading. I am not looking to solve a particular problem right now but learn how to answer my own questions and troubleshoot. I thought this manual 9-6115-642-24P would be the right one since it breaks everything down so far. Have I just not dug deep enough or am I not looking in the right book yet? Right now I am searching for the 803A but I have one of each 802A,803A and 804A so I will be needing all of them eventually. Thank you for the help.
 

grywitt

Active member
Steel Soldiers Supporter
147
105
43
Location
Nm
I have been looking through some of these TMs and they are awesome but I am struggling to find a good list of what is wired to where in this plug. I ran across one post where Guyfang told someone to test from pin.. to gnd and check the reading. I am not looking to solve a particular problem right now but learn how to answer my own questions and troubleshoot. I thought this manual 9-6115-642-24P would be the right one since it breaks everything down so far. Have I just not dug deep enough or am I not looking in the right book yet? Right now I am searching for the 803A but I have one of each 802A,803A and 804A so I will be needing all of them eventually. Thank you for the help.
Well I look forward to any replies I get but I found it. Wrong book. It will be great once I know which book to look into depending on what I'm looking to find.
 

Guyfang

Moderator
Staff member
Moderator
16,768
24,103
113
Location
Burgkunstadt, Germany
I have been looking through some of these TMs and they are awesome but I am struggling to find a good list of what is wired to where in this plug. I ran across one post where Guyfang told someone to test from pin.. to gnd and check the reading. I am not looking to solve a particular problem right now but learn how to answer my own questions and troubleshoot. I thought this manual 9-6115-642-24P would be the right one since it breaks everything down so far. Have I just not dug deep enough or am I not looking in the right book yet? (You need to look at the TM 9-6115-642-24. Turn to page PDF Page # 107. Start reading there. They are about the same on all models, but LOOK to be sure.) Right now I am searching for the 803A but I have one of each 802A,803A and 804A so I will be needing all of them eventually. Thank you for the help.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks