Most of the posts regarding converting an M37 to a dual master cylinder don’t include part numbers. I checked the part numbers in the posts that did reference them, but could not locate them on parts store Web sites. Does anyone have current part numbers for a dual master cylinder that fits an M37? Thanks in advance for any help.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M37 DUAL MASTER CYLINDER PART NUMBER
- Thread starter JoeM35
- Start date
M37 Master Cylinder (uglytruckling.com)
I have this installed in my truck. I ordered a NAPA 1980 Chevy C30 master cylinder, I am pretty sure I got NMC M2135 but I don't have the receipt anymore.
I have this installed in my truck. I ordered a NAPA 1980 Chevy C30 master cylinder, I am pretty sure I got NMC M2135 but I don't have the receipt anymore.
Sorry, no part number handy, but here's what I'm doing to convert a two-bolt-mount tandem master cylinder to replace the three-bolt mount original master cylinder for my M37. Scroll down a bit in the post: https://www.steelsoldiers.com/threads/m37-restoration-project-revived.219891/
Do you still have the original drum brakes front and rear? You might search for a tandem master cylinder for a drum/drum system with the same bore diameter as the original master cylinder.
Thanks for the information. It’s very helpful. Yes I have the original drum/drum system that I plan to keep.
Thanks Redleg130. I will check this out.