• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

How not to install a Duramax in a M998

Mogman

Moderator
Staff member
Moderator
Steel Soldiers Supporter
6,930
9,584
113
Location
Papalote, TX
I have a duramax/allison 5 speed in my Civillain Hummer, it has 2.56 gear and max speed is 87 mph then its governed by the ECM, We had one in a race Hummer also and it would only do 91 in baja. You conversion looks great.
If I remove the speed limiter but leave the stock rev limiter in place it will do a little over 120MPH.
Almost 17K on the conversion and have not had to rework anything I can think of, I have blown out a bunch of aftermarket half shaft boots but what can you expect from cheap Chicom stuff.
 

thoner7

Active member
313
196
43
Location
NE TN
If I remove the speed limiter but leave the stock rev limiter in place it will do a little over 120MPH.
Almost 17K on the conversion and have not had to rework anything I can think of, I have blown out a bunch of aftermarket half shaft boots but what can you expect from cheap Chicom stuff.
Can I ask how much you paid for the wrecked donor truck?
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks