Engine block heater Where to buy?

[sidewinder]

I have a 5 ton with a 465 multi fuel. Where can I get a block heater to install in the freeze out plugs. They are 2"plugs
Rob ... _._

 

[Stan]

It's been talked about on here try doing a "search". I thought the plug size was the only critical thing. Check NAPA .

 

[akexc]

I have a 5 ton with a 465 multi fuel. Where can I get a block heater to install in the freeze out plugs. They are 2"plugs
Rob ... _._

Did you have any luck tracking this down?

I've done a search in this forum, and don't find a thread that helps me. I have a 5 ton multifuel dump.

Thanks.

 

[sprucemt]

You need to ask for a frost plug heater for an Olds 455 V8 from the 80's or a Jeep Cherokee 4.0L six from the 80's. 2" is the correct size. Napa uses Pyrol heaters, Katz is a good brand also. I've been using these for years ad have been satisfied with them,

 

[gimpyrobb]

Good call Don, I might have to look into one for my wrecker. Thanks.

 

[WillWagner]

Here's a place that makes them.
http://www.phillipsandtemro.com/prod_ColdStart.asp

 

[akexc]

THanks folks.