• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

New winch

jimmcld

Member
469
5
18
Location
Denton, Texas
We just got out new winch installed and cable put on it yesterday. You might not think that it is much of an accomplishment, but have you ever tried to wind on a cable without a PTO or drive shaft? We did this with an electric drill.

Haven't tried to pull anyone out of a mud hole yet with this method........

Jim
 

Attachments

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,125
113
Location
Athens, Ga.
Are those 11:00's on that truck?

I'd like to see some more of that truck :-D
 

wsucougarx

Well-known member
6,951
65
48
Location
Washington State
Speaking of winches, does anyone have a source to buy that ooey gooey black tar oil that goes on the winch cable? I'm sure it's pretty much restricted. Doesn't look like the healthiest stuff to have just laying around;-)
 

jimmcld

Member
469
5
18
Location
Denton, Texas
How long did it take to wind the cable?? Just curious.

Did anyone utter the famous line from Jaws "I think we need a bigger drill???"

It probably took a couple of hours to wind the cable on. Yes, we did need a bigger drill. We kept having to wait for it to cool down every 20 feet or so.
 

jimmcld

Member
469
5
18
Location
Denton, Texas
Are those 11:00's on that truck?

I'd like to see some more of that truck :-D

Yes, they are 11.00's. Very observant. The truck belongs to Vietnam Veterans of America, Chapter 920. It was a great buy. The odometer only said 12,000 miles when we got it and the more I work on it, the more I believe that to be the origional milage. It drives like a new one and there is virtually no wear on any of the parts.
 

jimmcld

Member
469
5
18
Location
Denton, Texas
Speaking of winches, does anyone have a source to buy that ooey gooey black tar oil that goes on the winch cable? I'm sure it's pretty much restricted. Doesn't look like the healthiest stuff to have just laying around;-)

The stuff we used is from John Deere. It sprays on as a foam and seems to make rust disappear. It's their chain and cable lube.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks