• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

My new Deuce Hauling trailer!

100dollarman

New member
987
5
0
Location
Lucerne Valley, Ca. 92356
Thanks, guys----

The trailer works great! Pulls straight and true--- feels very solid- no prob with a deuce on there. Truck got 11mpg on the way there (loaded), and 13.5 empty (including some non hiway).

The more I look at the trailer, the more I like how it is built.

I will pull the bearings this week and repack them----I dont trust the outside zerks to lube very well, either.

Cant wait to use it again!!!:-D
 

Keith_J

Well-known member
3,657
1,316
113
Location
Schertz TX
2009 3500 4wd 4dr, 6.7L cummins, 6 spd auto, 4.10s. One of the best things about this new truck is the built in exhaust brake-- I love it!
Get about 20mpg empty on the hi-way. I have a 40' Weekend Warrior that I pull with it and get about 10-12 mpg- I expect to get about that pulling this trailer and a Deuce.

I really like the truck!
I would be surprised if you got 10 MPG at any speed over 45 MPH, that is pushing a LOT of air.
 

DoctorCheney223

Active member
134
118
43
Location
Henderson, NV
Picked up a 2006 30' PJ trailer off of Craigslist last nite---- delivering a Deuce today!

25' plus 5' foldover ramps. 21K triple axle. Pulls real nice so far! I am going about 200 miles with this truck today---

A few pics-
That's what my truck looked like on the way home and this is what it looks like now.... thanks Mark!!!



thanks,
Ron
 

Attachments

100dollarman

New member
987
5
0
Location
Lucerne Valley, Ca. 92356
The new trailer is working out great! It has been my good luck charm for selling trucks! I have used it to deliver trucks about 12 times now!

I am taking a M1028 and a M1009 to AZ. tomorrow---- they barely fit on there![thumbzup]

I hauled a few M109 box trucks--- I was really worried about how tall I was for power lines and overpasses!!!! Cleared everything by a hair! About 13'7" tall.

Here are a few more pics since I know you guys love pics of duallys pulling MVs on a Gooseneck!!!!:grd:
 

Attachments

Bighurt

New member
2,347
46
0
Location
Minot, ND
If I ever make it your way I'll be sure to stop in with an MT, and lug it all the way up here.

You think a bobbed deuce and a M1028 could fit?

Would that qualify for muilti purchase discount...LOL.
 

Alredneck

Banned
1,494
15
0
Location
TN
Man, you guys and your cummins, the old hemi in the mighty dodge been doing this all year!

Keep up the good work, I kick myself in the arse everyday for not getting the 5.9 !

Loaded I get high 7s low 8s ( 55-65mph depending on how bad traffic is )so you would think that big cummins should be doing better.
 

Bighurt

New member
2,347
46
0
Location
Minot, ND
I get on average 15 MT in my F350 6.4, this week shes down to 5.6...

What can I say its below zero running #1 and she idled awhile yesterday...LOL
 
Top