axles

[notsosanestan]

anyone know a good place to get the axles from a m1008? or should i just buy one with no engine or something from a auction

 

[Mudstone]

Let me google that for you

 

[acmunro]

Might want to check with GM72K10 on here. He is going to have some axles soon. I am not sure what he is going to do with them, but I bet they are up for sale.

 

[Cucvnut]

you can get a 14ff from the junk yard a dana 60 will run you about a grand for one.

 

[scottodog]

I know a guy poss. parting out a 1028 14ff / 60 with posi in central NJ. Let me know if your interested and I will give him a call.

 

[4bogginchevys]

anyone know a good place to get the axles from a m1008? or should i just buy one with no engine or something from a auction

YA

 

[fitz]

Like you said, you might be just as well off buying a truck at auction for the axles. Last week at the GSA auction in Mass they had a M1028 that was a running and driving truck (rusty) that sold for $1100.
I think you would spend that much on 1 ton axles alone. I'm kicking myself for not buying it but I bought 2 M1028's in the last 2 months.

 

[allrevup]

Try searching in SteelSoldiers, ColoradoK5 and Full Size Chevys classifies. You may try Ebay and Craiglist ( and to see what is avalible in craigslist.org nationwide, sometimes over 8,000,000 listings, try craiglook.com enter Chevrolet axles, CUCV, M1008, M1028 or what ever. You may find something just a close drive to you. This are heavy and expensive parts to ship.

 

[84cucv1ton]

i have axle sets and a parts truck i would sell.. PM if your want to know more

 

[motormayhem]

If your not planning on running more than 36-38" tires a d44/14bolt combo will work just fine and save you a lot of $$. I just did that swap on my 1009 and it cost me about $400 for two axles that I could bolt in and run without changing a thing.

 

[Mudstone]

still have those 1008 axles? i wanna do the swap into my 1009

 

[84cucv1ton]

if you mean me. yes i do.

 

[Mudstone]

how much for the Both off the 1008? i can come pick them up. Are they in good condition?

 

[notsosanestan]

still looking for axles i really need them my rear just blew on my m1009 i can get m1009 axles but why waste the money when i wanna upgrade anyway any help would be appreciated

 

[motormayhem]

Try craigslist. I got my d44 and 14 bolt and other than wheel bearings and some seals they work great.

 

[notsosanestan]

been looking on there just hoping someone on here would have some to sell i really didnt wanna buy a set of m1009 axles just to use the rear

 

[Cucvnut]

check pirate 4x4.

 

[SmokeyDod]

I have set D60 & 14B out of M1008 . Loc in upper SC. Just remember when someone says they have 14 bolt, if it's out of a 3/4 ton truck or suburban it is a 14B BUT not like what's in the MV . First of all it probably won't have the Detroit locker and also the brake shoes on the MV's are normally wider than the 3/4T. PM me if interested.

 

[motormayhem]

However, the m1008 ones and non-3/4 ton ones are not bolt in. The spring mounts need to be moved in.