R Racing
Active member
- 2,767
- 16
- 38
- Location
- St. Leonard, MD
What a Awesome looking Rig you got there !!!! 
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Overkill Customs M920 Build
- Thread starter eldgenb
- Start date
convict1
New member
- 63
- 0
- 0
- Location
- Fort Worth Texas
Looks nice
eldgenb
Member
- 748
- 1
- 16
- Location
- Spokane WA
so I have a bit of a dilemma, I originally had the idea way back about putting a sleeper on the truck and when I got it home I discarded the idea. Well now I am looking at the possibility of putting a 36" sit down model on it after all, I would move the crane back to put it on. Now the gap that is currently there was going to be for tool box's and a spare tire carrier but with the crane I can always either pic a spare and put it on the trailer or in the bed of the truck for longer trips. What do you guys think? I don't really plan on sleeping in it much if ever but I think it would be great to throw the dogs in or treat it like an extended cab for the boy to play in or sleep in on longer trips. Just a thought. What do you guys think the next stage should be?
eldgenb
Member
- 748
- 1
- 16
- Location
- Spokane WA
well even though I posted for opinions I could not pass up the deal so I bought the sleeper. It has self contained a/c and heat, 36" Stereo speaker, storage and is an interesting color of blue but hey, all that can be easily dealt with. No dent/breaks and even comes with the gaskets between truck and cab. I am going to store it until this winter when I pull off the cab to swap the trans or maybe I will get impatient and do it sooner who knows. Sleeper in the near future!! also this gives me the ability in the State of Washington to give up my collector plate and switch to RV so that LEO's and I are on the same level when I tow really big things!!
eldgenb
Member
- 748
- 1
- 16
- Location
- Spokane WA
a quickie
A hasty rendering of how it may look when finished!
A hasty rendering of how it may look when finished!
Attachments
- 2,868
- 27
- 48
- Location
- Delta, PA.
I think it will look good.
frodobaggins
Active member
- 2,861
- 16
- 38
- Location
- Ruston, La
I'll get those directions sent over for the delivery ASAP. Sorry I forgot.
eldgenb
Member
- 748
- 1
- 16
- Location
- Spokane WA
Yeah it sure has come a long way since you and I talked about you relieving me of it prior to pickup!
droopypete
New member
- 62
- 0
- 0
- Location
- Melbourne Australia
When you first posted the idea I was quite hesitant about how it would look, but the pic looks great, get the color sorted and it will be fine.
Peter.
Peter.
R Racing
Active member
- 2,767
- 16
- 38
- Location
- St. Leonard, MD
I think its a great idea ! Would love to do that to mine someday !!
- 10,866
- 763
- 113
- Location
- Appomattox, VA
This rig is freakin awesome. Way to Dare to be Different!
Subscribed...
Subscribed...
eldgenb
Member
- 748
- 1
- 16
- Location
- Spokane WA
well bad news, should have brought a tape, guy said it was a 36" was actually a 42" so the legs of the crane will hit the 16.00/20's as is, well, I have a really nice 42" sleeper that would work great for someone without a crane I will sell cheap, looking for a real 36" one now.
- 18,550
- 5,916
- 113
That really stinks 
I don't suppose you'd want to "circumcise" it, would you?
Kinda like the Rabbi said: "Oops, cut it twice and it's still too short!"
If you were closer, I'd be interested in your surplus sleeper. How much do you want for it, anyway?
I don't suppose you'd want to "circumcise" it, would you?
Kinda like the Rabbi said: "Oops, cut it twice and it's still too short!"
If you were closer, I'd be interested in your surplus sleeper. How much do you want for it, anyway?
droopypete
New member
- 62
- 0
- 0
- Location
- Melbourne Australia
It could be an opportunity to fabricate one, my original fear was that it would look a bit too "civilian" for your application, most sleepers I have seen look obviously fibreglass and the radius on the corners is too large, you can now fab one out of steel/aluminium, break out the dimple dies and rivets and make something that looks factory, I know you have the fab skills but not sure about time.
Peter.
edit,
Maybe a cut down, (really cut down, length, height and width) shop van could work, it would certainly have the military look and should be quicker and easier than starting from scratch just a thought.
Peter.
edit,
Maybe a cut down, (really cut down, length, height and width) shop van could work, it would certainly have the military look and should be quicker and easier than starting from scratch just a thought.
Attachments
eldgenb
Member
- 748
- 1
- 16
- Location
- Spokane WA
$200 would be nice to get for it. cutting it would be a PITA, its all aluminum and a tig welder is on my christmas list. I would love to fabricate one but if I am going to go through all of that I would graft another cab on it and make it a crew cab but that is a loooooot of work not to mention finding another cab for my son to be a little more comfortable. If it had been 36" like it was supposed to it would be perfect, well once this one is sold I will just get the right one, making one would cost more than it would be worth for me.That really stinks
I don't suppose you'd want to "circumcise" it, would you?
Kinda like the Rabbi said: "Oops, cut it twice and it's still too short!"
If you were closer, I'd be interested in your surplus sleeper. How much do you want for it, anyway?
Last edited:
Ord22
Member
- 571
- 4
- 18
- Location
- Stockbridge, Ga
good looking truck! great idea for the sleeper. it will sure be a one of a kind when its all said and done, good luck. don't forget the pics.
R Racing
Active member
- 2,767
- 16
- 38
- Location
- St. Leonard, MD
To Bad your all the way in Wa . Do you have any pic's of it ?
eldgenb
Member
- 748
- 1
- 16
- Location
- Spokane WA
R Racing
Active member
- 2,767
- 16
- 38
- Location
- St. Leonard, MD
Boy I wish I was closer ! I have left over paint from the trailer , LOL . could make it match ! LOL