- 5,637
- 381
- 83
- Location
- Spring Branch, TX
Likely it's a coding or posting error and when the sale ends no EUC will be required.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
need help with pioneer trailer @ huntsville
- Thread starter 2dogsafightin
- Start date
- 57
- 5
- 8
- Location
- Harrodsburg , Ky
WRECKERMAN893 to th rescue
Wreckerman893 picked up my trailer today.. I owe him MANY THANKS... Its at his place in Sand Rock...This organization is great... Everyone helps each other out all the time...Im proud to be a member.... Im going to pick it up in a coule of weeks and I wouldnt be a bit surprised to see it with all the dents knocked out and a fresh coat of paint.....
THANKS Wreckerman....
BTW No EUC was required.... For those of you who were bantering about that...THANKS to all who posted, Bob
Wreckerman893 picked up my trailer today.. I owe him MANY THANKS... Its at his place in Sand Rock...This organization is great... Everyone helps each other out all the time...Im proud to be a member.... Im going to pick it up in a coule of weeks and I wouldnt be a bit surprised to see it with all the dents knocked out and a fresh coat of paint.....
THANKS Wreckerman....BTW No EUC was required.... For those of you who were bantering about that...THANKS to all who posted, Bob
wreckerman893
Possum Connoisseur
- 15,629
- 2,054
- 113
- Location
- Akenback acres near Gadsden, AL
Considering my luck at Haspin last weekend the recovery went surprisingly well....the little trailer pulled good and other than the hubs getting a little warm there were no issues.
Alway happy to help a brother out.
Alway happy to help a brother out.
porkysplace
Well-known member
- 9,604
- 1,494
- 113
- Location
- mid- michigan
With a fresh coat of paint by wreckerman it will probably be painted to look like a giant possumWreckerman893 picked up my trailer today.. I owe him MANY THANKS... Its at his place in Sand Rock...This organization is great... Everyone helps each other out all the time...Im proud to be a member.... Im going to pick it up in a coule of weeks and I wouldnt be a bit surprised to see it with all the dents knocked out and a fresh coat of paint.....
BTW No EUC was required.... For those of you who were bantering about that...THANKS to all who posted, Bob
3dAngus
Well-known member
- 4,719
- 101
- 63
- Location
- Perry, Ga.
Hubs should not get warm at all. If not excessively hot, maybe the bearings might be ok if just repacked, but if you went to that trouble, I would have a spare set on hand in case a visual inspection indicated damage. I believe I would consider that prior to a longer haul.
Good luck.
Good luck.