- 10,350
- 75
- 48
- Location
- Meadows of Dan, Virginia
Well, since the the illumination power runs through the 3-lever switch for dimming purposes only and he doesn't use it, why not bypass the switch altogether, that's all I'm saying...
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
3 lever switch issues
- Thread starter gimpyrobb
- Start date
deathrowdave
Active member
- 387
- 80
- 28
- Location
- falmouth, ky
Electroric Parts spray cleaner works well !! The old green back works well on the old Harley after sitting for long periods also.
Heavysteven
New member
- 2,090
- 10
- 0
- Location
- Hickory Flat Ga
I can pull mine apart for you and take some photo's. If I had to guess probally came lose during extreme operation. When was the last time you went for a swim in the truck? Could be water and mud up in there.
- 34,012
- 1,806
- 113
- Location
- GA Mountains
You know what the sad part of this thread is? Gimpy probably has a dozen light switches laying around in various states of use/disrepair.
- 7,055
- 143
- 63
- Location
- Mid Hudson Valley NY
Forget those electronic light switches. It speaks volumes that all the rebuilds of HMMWV's and HEMTT's have the 3 lever switch in them.
Uncle Sam got screwed on those switches.. They look cool, until they stop working, and possibly setting your truck ablaze at thw worst, and least, with no lights what so ever.
Uncle Sam got screwed on those switches.. They look cool, until they stop working, and possibly setting your truck ablaze at thw worst, and least, with no lights what so ever.
Chief_919
Well-known member
- 2,050
- 100
- 63
- Location
- Western NC
While I agree the new ones are crap, that isn't the rebuilds come off the line with the old style.
Since the 3 lever meets the spec, and costs less, using it means more profit for the company doing the rebuild- that is why they use them!
3dAngus
Well-known member
- 4,719
- 101
- 63
- Location
- Perry, Ga.
I recall when TVs had mechanical rotary switches for tuners back in the early 60's. My Dad used to spray down the contacts once a year. Then, early 70's I start my career in electronics.
The silicone spray for contact cleaner is still in use today. Great stuff, avoids corrosion, cleans, helps make much better contact. I keep a couple of cans around for all kinds of use, both electrical and mechanica. Available at Radio Shack (ouch), WalMart, or any automotive store. Ace has them as well.
The new style pushbutton switch has had a defect in the early production. They have been modded by the contractor and upgraded. Look for the more recent dates if you purchase one. You don't want an old one. I don't recall the date of the newly produced one right off hand. Short on time to research right now.
The silicone spray for contact cleaner is still in use today. Great stuff, avoids corrosion, cleans, helps make much better contact. I keep a couple of cans around for all kinds of use, both electrical and mechanica. Available at Radio Shack (ouch), WalMart, or any automotive store. Ace has them as well.
The new style pushbutton switch has had a defect in the early production. They have been modded by the contractor and upgraded. Look for the more recent dates if you purchase one. You don't want an old one. I don't recall the date of the newly produced one right off hand. Short on time to research right now.
zout
Well-known member
- 7,744
- 154
- 63
- Location
- Columbus Georgia
ears still ringing from the echo question in the background
Attachments
zout
Well-known member
- 7,744
- 154
- 63
- Location
- Columbus Georgia
Hey - that avatar looks like a truck on its side with a bad light switch 
- 1,079
- 57
- 48
- Location
- New Palestine Indiana
- 3,923
- 75
- 48
- Location
- Comfort, Texas
From what I have read here, the electronic switch is a very expensive piece of crap. Point taken.
gimpyrobb
dumpsterlandingfromorbit!
- 27,785
- 748
- 113
- Location
- Cincy Ohio
Yeah, I never figured this thread would make it 6 pages. I have other switches, no need for anyone to go out of their way on this. I was just wondering if my issue had happened to anyone else. This is the first time I have had a switch go "partially" out on me, usually they just stop working.
- 4,640
- 28
- 38
- Location
- Cambridge, Ohio
Yeah, like the Chinese fire drill on the highway stuck in a traffic jam on I-75 on the way back home from the '09 GA rally??????????
gimpyrobb
dumpsterlandingfromorbit!
- 27,785
- 748
- 113
- Location
- Cincy Ohio
HA! I think this was the replacement from that "drill". Took me almost 2 months to install it correctly too.
- 34,012
- 1,806
- 113
- Location
- GA Mountains
If you had your settings right it would only be 2 pages.
gimpyrobb
dumpsterlandingfromorbit!
- 27,785
- 748
- 113
- Location
- Cincy Ohio
Sure, Mr. wizard, don't you have a crew cab to build?!
Billy Bobbed
Active member
- 1,346
- 13
- 38
- Location
- Terre Haute,Indiana
Or 3 pages,20 posts per page.
- 34,012
- 1,806
- 113
- Location
- GA Mountains
Waiting on my cabs to roll in.
frodobaggins
Active member
- 2,861
- 16
- 38
- Location
- Ruston, La
We'd STILL like to know if it works in the DIM position...
gimpyrobb
dumpsterlandingfromorbit!
- 27,785
- 748
- 113
- Location
- Cincy Ohio
Sorry to say, I swapped it out with out testing. I now have dash lights and all other lights in working condition. I even had the time to re-aim my headlights. Its amazing how far off the passenger side was, and I never noticed it until I installed the LED headlights. Sort of a "night and day" difference, hehe. I did save and tag my 3lever for a tool box backup. If you guys don't have one on the truck, you should think about it. Nothing worse than driving at night and having your lights go out. It would be real easy to have a semi truck mash you without tail lights.
I thought I answered that, the dash lights did NOT work in either position, sorry.
I thought I answered that, the dash lights did NOT work in either position, sorry.