cyamaha2007
Member
- 147
- 3
- 18
- Location
- Warrenton Mo
So this is my solution to a bad foot and wanting to build my own pole barn It going to be a 36x56x14h. I though you guys might enjoy.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Diy 6x6 scaffold
- Thread starter cyamaha2007
- Start date
steelandcanvas
Well-known member
- 6,187
- 85
- 48
- Location
- Southwestern Idaho
Nice job! And when you get the shop all built, you'll have the framework for a camper already in the Deuce.
Stan Leschert
New member
- 1,662
- 90
- 0
- Location
- North Vancouver, BC, Canada
Adapt, Overcome, and Survive.
That looks like a really skookum portable scaffolding setup. Unless Gimpy is involved in the project, that one won't turn turtle.
Keep us posted with pics of the new MV Hotel!
That looks like a really skookum portable scaffolding setup. Unless Gimpy is involved in the project, that one won't turn turtle.
Keep us posted with pics of the new MV Hotel!
Flyingvan911
Well-known member
- 4,709
- 158
- 63
- Location
- Kansas City, MO
Looks like a nice project.
cyamaha2007
Member
- 147
- 3
- 18
- Location
- Warrenton Mo
Thanks guys. Katie and i will be doing all the construction except the concrete. Any of the mv family are welcome to be a part of the project. The doors willl be open to anyone needing a place to wrench on the weekend. 
Wolf.Dose
Active member
- 1,062
- 9
- 38
- Location
- Boehl-Iggelheim, Germany
Looks like you are doing with your Deuce what the US Army did in Europe in the 70's and 80's, convert the truck to personal needs. By that time, that was more or less illegal, however, any platoon / company did do so. A wooden Body was a minor modification. However, they did to my knowledge convert everything, including big sheet metal work.
Nice try, continue!
Wolf
Nice try, continue!
Wolf
- 18,550
- 5,916
- 113
I can see the makings for a good old AMISH & MV Addict BARN RAISING in the works here!
Anybody near enough to rally and help?
Wishin' we were closer.
Anybody near enough to rally and help?
Wishin' we were closer.
bones1
Member
- 854
- 4
- 18
- Location
- Southern Maryland
Good job so far. But we will need more pictures please.
- 14,263
- 1,767
- 113
- Location
- Dayton, OH
I think the purpose of the weed eater in pic 5 is to trim the weeds, not hold them down.
The scaffolding looks like a good idea.
The scaffolding looks like a good idea.
emr
New member
- 3,209
- 25
- 0
- Location
- landing , new jersey
I think the purpose of the weed eater in pic 5 is to trim the weeds, not hold them down.
The scaffolding looks like a good idea.
emr
New member
- 3,209
- 25
- 0
- Location
- landing , new jersey
just an idea, but an LVL the length of the inside of garage along the sides of deuce, and another across front and back the width of in side of LVL ends , and 24 inch on center some 2 by 8s across them and sheath/deck it , and u could build the while thing from top down 
and just think of the party at an air show,over everyone else... i have done that before,
and just think of the party at an air show,over everyone else... i have done that before,
cyamaha2007
Member
- 147
- 3
- 18
- Location
- Warrenton Mo
sorry guys the building build thread is over here http://www.steelsoldiers.com/conversations/76229-follow-along-i-build-my-first-pole-barn-36x56.html