need radiator cheep

[big hoss]

just put hole in radiator with the winch. where can i get one for cheep?

 

[wsucougarx]

I put a hole in mine two weeks ago. I soldered the holes and shes good to go. Is the damage pretty extensive?

 

[big hoss]

yea pretty bad, winch kept rolling in and it hit the top winch bar and sent it through the radiator

 

[hoop]

What is a "cheep"?

 

[hoop]

cheep (ch p). n. A faint, shrill sound like that of a young bird; a chirp. intr.v. cheeped, cheep·ing, cheeps. To make a faint, shrill sound or sounds; chirp.

 

[big hoss]

cheap

 

[gimpyrobb]

Cheapest you will get is pulling it and having a rad shop fix it.

 

[wreckerman893]

Check and see if there is an old school radiator repair shop near you.....even a used deuce radiator is going to cost a few hundred bucks.

 

[hoop]

$250 good take out.

 

[big hoss]

You have one for 250? or are you saying that's a good price for a used one?

 

[swbradley1]

Docfarmall had new ones for $450.

 

[DieselBob]

Docfarmall had new ones for $450.

Nice price for new...

 

[M35A2-AZ]

I would check with Radiator Shop first, Got my radiator repaired and cleaned out for $75.

 

[dozer1]

Hey BH , Could you post a nice closeup of the carnage? It would make it more clear if it is fixable or not. thx

 

[Heavysteven]

Yes, agree photo's of damage.

Find a dealer and call ask for a take out. If it's not bad take to a radiator shop and have it repaired. Either way it's coming out.

 

[SCSG-G4]

The OEM radiator (still can be made per an older thread) is close to $900. Of course, that is why the experienced winch installer has a 1/2 inch plywood sheet in front of the radiator while working on the winch - lots of threads on that too!

 

[Capt.Marion]

The OEM radiator (still can be made per an older thread) is close to $900. Of course, that is why the experienced winch installer has a 1/2 inch plywood sheet in front of the radiator while working on the winch - lots of threads on that too!

I believe he was using his winch at the time...

 

[big hoss]

Yea I was using it. It poped off and kept spooling in and I forgot about it untill it hit the bar on top of the winch and pulled it in to the radiator. I will have pics tomm to see if ya'll think its repairable

 

[Heavysteven]

You forgot you were operating a 10k pto driven winch.

 

[btaylor]

The guys at Gov. Liquidation found out that the forks fit between the bumper and grill gaurd. Here is my repair until I can get one from another truck.