• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by bchauvette

  1. bchauvette

    MEP-003a No voltage

    FYI tb3 is under the regulator rectifier you have to remove the blower housing (if I'm wrong please let me know).good luck with the correct wire to un- hook or the locatio on the tb my gen set is not marked. I have no Idea which wire to un hook.
  2. bchauvette

    mep 003 no power output, disconnected battery while running.

    yes pulled it out and pushed it incouple of times.
  3. bchauvette

    mep 003 no power output, disconnected battery while running.

    thank you for the tm and page number. With all the searching I've done already I must have searched that already I will certainly try again wish me luck
  4. bchauvette

    mep 003 no power output, disconnected battery while running.

    set starts and runs fine. no voltage at the load terminals, no readings on the freq meter or volt meter
  5. bchauvette

    mep 003 no power output, disconnected battery while running.

    All of a sudden my MEP 003 stopped putting out powerAlso No power to the convenient outlet. The set came with a battery disconnect switch. I just realized After many days of searching the TMs that I I may have been disconnecting the battery while running. I've been scouring through the TMs...
  6. bchauvette

    Need brake adjustment help

    could point to thebrake adjustment TM for aM944a1 with page number?(sameas a M923a1but extra long chassis thanks in advance Butch.
  7. bchauvette

    Concerned over oil pressure

    screw a mechanical guage in the holethe sending unit came from. I believe the TM numbers are minimums.
  8. bchauvette

    Memorial Day Parade Monday 5/30

    Do you have to know in advance or can we just show up. I missed two recent events because something came up at the last minute.
  9. bchauvette

    What have you done to your 5 ton this week?

    Power on warning device I continually forget to shutoff the master power switch totally discharging the batteries. One of my 6tl's completely shorted. So I installed 2 4D's and fabricated a Power on warning device. As the solonoid is double pole double throw I'm going to add Lights on warning...
  10. bchauvette

    Just bought a FLU 419!!!

    Had the same issue. The pump consists of a cam shaft pushing plungers. The fuel was so old it turned to varnish. The cam pushed the plungers up and they stuck there. I had to remove the IP and have it rebuilt. The injectors also needed rebuilding. I have pictures of my home made injector puller...
  11. bchauvette

    BBQ Convoy @DENTON Rally

    No I am not Ken's wife! Concubine maybe.
  12. bchauvette

    BBQ Convoy @DENTON Rally

    I'm in :-)
  13. bchauvette

    Just bought a FLU 419!!!

    Better get Kermie in your avatar or I'll contact child services.
  14. bchauvette

    Andy and I added a Mercedes to our motor pool

    I do have court ordered supervised visits. The reason you can't upload pics cause Kermie screwed with your phone. He's Pissed Off. You may want to put a picture of the M944 near his bed.
  15. bchauvette

    "DC control circuit breaker" poping out when moving control dial from off

    I had the same problem with my MEP003. Took almost two tanks of fuel and days to diagnose. I had a interment shorting shut off solonoid. Not knowing how your 02 is configured if you can try disconnecting it and see if the breaker pops. You may be able to manually do what the solenoid does to...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks