Recent content by bcolemanttu

Had did you wire switches and what size wire did you use

How did you wire it?

I am wiring one of these through 2 on/off switches. 24V in to 2 switches and then on to TE Connectivity P/N 213906-1. Using this scenario what gauge wire do I use and do I need to use the 24V large pin or just send power 24V to pin 6 from HID switch and then to pin 8 from the IR switch and wire...

The website has changed and I am not longer able to find the instructions on how to wire in a manual glow plug button. I do not want to disable the stock card system but have the button as a back up should the card fail. Help pictures and instructions would be appreciated.

I replaced my fuel pump and injectors. Quite a few of the lines cracked. Where would you recommend me finding replacements?

They are really energizer brand.

Your right that would be bad that is why there is additional bracing under underneath. If any thing over engineered. Flimsy sheet metal is not main support.

Frustrated with the original batteries and trays I decided to take them out and start over. :mad: I took out the original battery trays and found a great dual battery tray for twin Type 31 batteries. Welded up new mounts and installed 2 new AGM batteries. :lol: The batteries are not as...

Found very similar steel wheel with a 2000 lb rating. Would that be enough. Mounting 305/70-16s on it. Have 2.5in lift with new springs.

Does anyone know where I can get an answer to my question?

Any reason these wheels will not work on the M1009? Headed to buy them as soon as I get some reassurance from the experts. RIM BOLT OFFSET REAR SPACE WEIGHT CENTER BORE LOAD 16x10 6x5.5 -38 4" 37 4.28 1700 THANKS:smile:

What if I used this switch and disconnected both the 12 and 24 at the same time with one switch. Heavy Duty Double Pole Battery Switch, 400A Continuous

Do you remember what size for each?

Go it thanks

Thanks for the feedback.