Recent content by connectingbar

Air Pack first wheel cylinders next but not back to the air pack

>10 on top and >20 on bottom per the TM

Airpack rebuilt, master cyl rebuilt all new brake lines wheel cyls and shoes but I have a soft brake pedal. Every wheel cyl is bled and now I am wondering what the problem is, Anyone have any thoughts? and what I should check

I am helping a friend with his truck and he rebuilt the airpack. From what I have seen , the air pack was rebuilt the right way. I just stopped by to see how he is coming and he is not building any air. A ton of air is coming out of the vent line. Any thing I should look for. All the lines are...

Thanks

I am looking for the history for the new M35a2 and I remember long ago there was someone who could track down the numbers on the frame and data tag. Please let me know if this can still be done

There are plugs on the outside of the box on the passenger side of the box for 110 and 240 I am not too familiar with the 109 so pardon me for not going thru thr tms I would ask where in the tms to look for the info

Its been quite a while since Ive been on here due to a huge family loss of my brother, Mother and sister the pass few years and now I am finally getting back to the hobby. First I am waiting for the heads to come back from the shop for a head gasket job on my Deuce so I have a little time on my...

drove mine last night ( 1st time in 4 months} went to get fuel and I found oil coming out of the stack and @ the turbo I think it is turbo rebuilding time What do you guys think

It turns out to be a bad accessory switch. After chasing down every wire on the truck, cleaned all connections, tightened down grounds. I tested the switch and found that it is shorting out. George at White owl sent me out a new one. Thanks for all of your advice

Ok my Deuce was slow to start . While pushing the starter switch it seemed to be a low battery condition but it would still start after a few attempts. While I am not any good with electronics I called JT for his advice. It seemed like a loose connection. I checked all connections from the...

Dropped the fuel tank to clean it out. Tons of rust inside but it is cleaning up nicely.After a good stem cleaning I am going to finish it off with electrolosis to try to get any rust that remains. I am aslo cleaning the rust on the fuel pump bracket but I am at a loss on how to unplug the pump...

Thanks. This is what I am looking for!

Does anyone have a pic of where to mount a fan or 2 in the cab? It is getting quite warm here in NY and I have 2 24 volt fans I would like to install

Just changed the lower rad hose, kind of a pain but not that bad. next weekend I will get at the fuel filters