Recent content by Mercuno

I had an M35 A2 and the axles were not lockers so we got stuck a lot I have found a good deal on an 818 and was wondering does it have lockers or limited slip or anything better than one tire fire thanks for the help in advance

I agree, the next thread will be budget 4wd conversion, maybe some duece axles

https://goo.gl/photos/kKQXGZLo38q7D3b99

Everything happens for a reason.... Wouldn't have changed those ratty glow plugs otherwise. I had to crack the return line on the pump to bleed it and she is firing. Manifold is still off so I shut it down as soon as she cranks. Thanks for the help, I will have more later.

https://goo.gl/photos/bSmqA9aTddkK7My9A

Should IP spray out of return line? Hasn't yet but fuel is reaching injectors

Replaced glow plugs old ones were swollen on ends and some were cracked. Still no start. Pulled #2 injector looked a little rusty but was running 3 days ago?

Anyone know test procedure with multimeter? Would they all go bad at once? Fired right up after new starter and solenoid is clicking

Bought truck put batteries to it, wire at firewall was corroded so I replaced it,replaced starter and she cranked and ran, drove it about 1/2 mile down road behind my place started intermittently losing throttle and dying. Finally just gave up on me. Thought it had ran out of fuel but was time...

Well the business side of it was why the purchase was made. It must get to the site empty, (loaded with tools and welder on the flatbed we built). Then hook to our trailers with building components and or scissor lifts Skytraks etc etc and get them through and around mud/rough terrain. I in no...

I hear that and understand it. Just excited is all. Heck,even with all this, I want two more lol. So I guess I'm going to go full on commercial with this. What about the lights etc where are the regs regarding our trucks?

I just bought a m931a2 2001 model. I finally got it insured as a flatbed truck liability only not expensive but stressful. I had to convince them the only way they would get money from me out of this truck would be to inspect it so I can title it properly after getting the inspection which...

i want two

Modded the pump and she woke up a lot but I didn't go too far with it

I added about 800 lbs in steel, 800 lbs in welder 300 in torches and 500 in tools. I know its not much but should help. I wanna go to a meet and be able to hang with everyone at least, don't have to be the baddest. Plus I can fix just about anything lol.