Recent content by MGD

Len Thanks for saving me money.I know there is one like this for the halftrack that Gary sells thought it might be the same.I dont know crap about these things other than there hard to move after 30 years in the same spot .I mean the halftrack itself not the jacks.I still dont have mine home...

Len Do you think those will work for the halftrack as well?If so I better order a couple thanks. Mike

dangerous truck I normaly wouldnt get involved but you should get rid of the chip on your shoulder and listen to what these people are saying.Just because the dnr built a truck does not mean its safe or legal.Also remember the winch lowers your payload.Alright now go back to your station and...

Kublos surplus in Brackney Pa has tires 80 bucks each on the rim you pick them out .They have plenty of tires in the 90 to 98 percent tread range. Mike

Thanks for all the replies.I guess I've got to pull off the fdc .I really thought this was the end of the world and was going to need a new pump.Cranetruck I'll check my local parts guy to see if he has one if not I'll pm you thanks. Mike DeGaray

Its the stop plate screw.I was trying to loosen the locknut so I could turn up my fuel once I get my pyrometer.This was just going to be a prelimanary loosening and lubing and the screw came right off.

broke pump Its the the double nutted screw below the fdc under the triangular tamper pruff cover

I need help I went to loosen the lock nut on the fuel screw and the bolt broke off.Is there any way to fix this or do I need a new pump by the way pump not in budget at the moment.Thanks for any help or advice. Mike

The NAPA #3540 filter is 6 micron thats what I put in my final with a 3512 in the secondary.Hope this helps. Mike DeGaray

PM sent on exhaust parts Mike