Recent content by Michael

I just replaced mine that saw no use in the rain at all. Just fell off in the driveway. I to went to O'rielly and walked out because all except the over $30 made in USA trico were made in China. I ended up with Autozone's cheepest at 8 each. At least they were made in Mexico.

Ended up being 3 different sizes. I bought 5/32 Inch, 3/16 Inch and 3/8 Inch. The 3/16 was too tight but I was able to force in on. Probably should have been 7/32 inch. Gates part numbers, 27042, 27001 and 27004. I got 4 feet of the 5/32 and 1 foot of the others and had a lot left over.

My vacuum hoses and part #9 (adapter) are rotten. My question is can the hoses be run directly into the regulator bypassing the adapter? Anyone know what size hose and how much I need? And what about 2 through 6, can that be left out also?

I spent the afternoon getting mine running again. Eight working glow plugs is a heavy load. I measured about 10.5 volts at the relay that increased past 11 as they heated up. My problem turned out to be the part the relay moves in the injection pump was stuck. My battery is getting old, but if...

Completed sales on ebay of nearly new looking ones with just bad stitching brought 45 plus 50 shipping and complete sets of 8 door pins brought 35 plus 10 shipping. NOS doors were bring outrageous amounts. I would have thought the market would have been flooded with NOS soft door parts but I...

Found a condition tag Sent from my SM-G965U using Tapatalk

Are used soft doors worth much? I have a stack of them I got from drmo. Appears to be condition f , most with bad clear vinyl. Sent from my SM-G965U using Tapatalk

https://www.ebay.com/itm/303901759807?hash=item46c1f4d93f:g:WxEAAOSwSQ1gOnCd Any locksmith or just about anybody who makes keys. A usable frame with a title is worth keeping. There are plenty of parts trucks out there without a title due to the pain in the ass way GL and other agency make you...

All CUCVs have the same key unless it has been changed with one of the many other "upgrades". Ignition & Door Keys are a "B" blank and the code is 73Y2. Do you have a title for this "project"?

Did you see these? The middle one has some circuit diagrams. https://www.steelsoldiers.com/threads/cucv-ii-iii-lssv.105049/

Just got back from turning in my B20 and getting a B10. Here is the after action report. The girl behind the counter repeated several times that a new law was passed and they are just doing what they are told. She confirmed that this is all about People running B16s on new pickups and not paying...

After a couple of hours poking around the internet I think I have found the problem. It is all about tax collections. Apparently a B16 or bigger is a lot cheaper to buy than a POV tag for new pickup trucks. Here is the most informative link I have found so far. I find it irritating that I was...

Did you ever hear back from your guy. I haven't heard back from my representative that helped me with my antique tag.

I have always thought the same thing. At first I was happy because it was going to save me some money. The only problems I see is they say I can't have a B20, that I must surrender the one I have, and they plan to sell me a B10 not a POV tag. And I just bought a new trailer to move my...

I don't trust them to know what it is based on. They pretty much said they don't know why they are just doing what Jackson told them to do. The people making these decisions probably drive a prius. Sent from my SM-G965U using Tapatalk