Search results

TMG=Those Military Guys. Do a search for them on whatever search engine you use, they are also vendors on here if you look in the classifieds section.

Those military guys have a lighted license plate frame with a light if you are looking for something already comple. I don't have one but I saw it on their site. If you are handy at fabrication, you could probably make one of your own.

Yes SW, that is the place. My wife's family does it every year or at least the last few years. They do 4 weeks of Halloween there. Last year was our first year for it but it seems like a nice place. Sites are a little tight though. Have you been there?

Thanks for the warm welcome guys. I will have to change my wardrobe up a little then, I typically wear pink on Tuesday. It has the 6.2. The mileage was a little higher than I originally wanted at 38k but I figured it must have been a good runner since they drove it! The truck looked decent...

I will try to make it, the wife has a camping trip planned the last weekend of the month but it is just over the line in New Paris, OH so I will just leave for the day Saturday and come down. I hope to be bringing a HMMWV with me in addition to the 923.

Hi all. After watching auctions for the past several months, I finally pulled the trigger on a 1990 4 door out of Whitehall, OH. Now, I am just playing the waiting game. My EUC was submitted to the TSC on July 3rd. Who is the TSC by the way? Hopefully things go through quickly and I am able to...

Looks good Spyderman. Where did you get your seats? I've been thinking about putting air ride in mine also. The wife won't ride in it very often because of the rough ride.

I would be in for at least 2, maybe 3.

TMG, is this dead or do we still have something in the works?

I would also be interested in one for the front if there were no modifications needed and the CTIS is not affected. After posting, I just realized you didn't want to split the set up. Sorry.

Looking back through this post, I counted 24 people that said they would be interested in at least 1 locker. Just curious, did all of you send your info to TMG? For whatever reason, my subscription to this thread didn't tell me there were more responses so luckily this one came up while I was...

I removed the arm on mine this past weekend. Took me less than 5 minutes and that included crawling under the truck to see what tool I needed, back out to get the allen wrench and then back under again. Piece of cake! The arm seemed much easier to do than the washer method but that is just my...

This is kind of short notice but I am going to Lennon, MI to pick up some items from smittyjr355. I should have some trailer room if anyone needs something. I can get it back to the Indianapolis area, specifically Rushville if you want to split the costs. I can also store some items for a while...

I installed a radio and a dome light this week. While I enjoy listening to the whine of the turbo, I have to have some music too. I just happened to have this speaker laying around that wasn't being used. It fit perfectly wedged between the wiper motors and the roof. It sounds surprisingly good...

I haven't driven it much since installing the gauges but 1100 has been the highest EGT I have seen so far and around 20 on the boost. The EGTs seem pretty good but the boost seems low. Maybe that is normal for these trucks? In my 5.9 I can easily hit 40 with my foot into it a bit. What boost is...

I have been working on this for a few weeks now, it has taken me a while to collect all the parts and pieces I needed so I thought I would share with you all to give others ideas if they are looking to do the same thing. I ordered the Glowshift 3 gauge set (1500 EGT, 60 PSI Boost & 30 PSI fuel...

Thanks for the quick reply. I will use that location then. That should be easier than any of my bright ideas!

I am installing some new gauges, EGT, boost and fuel pressure. I have found some info on here where others have installed the EGT and Boost but can't seem to find anything about the fuel pressure. Should this go before the small filter shown as 3 below or after the filter as shown in 1 or 2? If...

Nice job. Which hoist did you go with? It looks like a "power hoist" brand. I would be very interested in knowing more about the hoist itself as I would like to add one to mine. I am looking at the power hoist 620 or 625 but when I was doing some pre measuring based on info on their site, I...

I am installing a coolant filter today along with a block heater. I know there are several threads on others that have done it and I have read through most. The easiest way for my setup is to use the hose going from the trans cooler to the block. I think I can remove where it attaches to the...