Search results

I wonder if a good DC welder like a mig welder that has settings for up to 24 volts would run a DC motor within its duty cycle time. Maybe start and stop the motor with a contactor to keep the welder fan running to cool the transformer.

roflroflroflroflroflrofl I perused the TMs for the 5 ton and the M35A3. I figure that I will keep the systems operable. I'm hoping McmasterCarr can supply the square section seals for the M35A3 and I don't know about the 5 ton yet. I don't think the CTIS should be a deal breaker. just...

Where are these seals sold?

The short body fine thread is for a late 6.2, NA 6.5 or a turbo 6.5 depending on what the pop pressure is and or the body number The long body fine thread is for the mid production 6.2. The long body course thread is the early production 6.2. Easiest way to tell what you have if you don't have...

Very Cool Airplane and very interesting and cool stories form those that flew and spent time around these birds. Please keep the stories coming![thumbzup]

I heard the term "cold lock" on the old generation diesel engines that are set out to idle in the cold and the fuel builds up and the engine locks up with results such as bent rods. Have you heard of or seen this condition?

Do you do these for customers? Such as R & R the tranny and such. Does the NP 205 fit on the 700r4? Is the NP 208 difficult to overhaul?

Jeff has helped me and is first rate! You can count on Jeff and every service he states in his post. Consider this post a reference of satisfaction!

Kenny, Bring my alternators. Dennis

Take the valve covers off and lever open and secure the exhaust valves.

I a going to give the Steel Soldiers Express a try. Is any one traveling from Henderson NV ares to the Iowa, Illinois, Indiana, eastern Indiana area, Minnesota area and able to carry a 14.50 x 20 Michelin M35 A3 wheel and then we rendezvous and I carry it home? The wheel assembly is...

May I just put a check in an envelope and send it to you or Chris, like I did last year? It's still $15.00 correct?

Awesome!! I plan on showing up!! Good to hear from You!!

Hope life is treating you kindly and everything is going your way!

Your idea is destined to failure. Go ahead and waste your time, the beer manufactures thrive in garage engineering. The CTIS is designed for pulsing the system to make it air up and otherwise control the tire pressure. As previously stated the system is not designed to hold a continuous pressure...

Thankyou for posting this video. The accelerator application seems counter intuitive but the video demonstrates good practice. I have only experienced losing a left front steer on a 1 ton Dodge pickup with a diesel, the pucker factor was indeed there. A quick counter steer and a nearly complete...

If you have no clicking noise, the signal is not getting to the solenoid on the starter. On the CUCV, that signal is generated from a relay referred to in the "doghead modification". Do a search to familiarize yourself with the "doghead modification" You could jump the starter terminals to make...

Thank Goodness nothing worse happened! After hearing your story, My one experience of going 75 MPH in my M931A2 tractor will be the last as well. I'm gonna look for a civi tractor with civi tires and the 8.3 and the automatic tranny that I can hot rod around in. Save the tractor for the off...

Taking for granted all functions such as coolant, oil pressure and the electricity is up to snuff, take a can of the old WD-40 ( the stuff that is flammable) or Shaffers super penetro 90 and spray down as best you can, spray down a short burst each port and the plenum of the other 2 ports that...

Is there any chance of damage to a sprag transfer case with this setup. The wheels will always freewheel at the same speed.