Search results

Yes,Thats the same truck but all new frontend parts were done and I fixed a grease fitting and greased them.Im not sure that's the problem as its not constant and I was riding with a friend who found out first hand so I know that feeling I don't think that's it the wobble would be some what...

Its not that checked that New rotors from napa and Timken front bearings both sides when the rotors got done. it seems to only pulsate as I brake the more pressure I do on the brake pedal the worse it gets and as you slowing down almost to a stop its a forwards backwards movement like something...

Thanks for the info everyone.I hope I can figure out my braking system.I have replaced the rear shoes,Front Pads,New Brake calipers,New rotors,Front wheel bearings,New hoses front and rear.The master Cylinder and the 2 proportioning valves are all I haven't changed and the Truck still has a...

Love the Pictures,I bet that Truck will look awesome with the wrecker bed.Theirs a guy close to me that use to own a wrecker like your building it was painted OD green.I t was well done and looked factory i love that truck.Though i haven't seen it in quite a few years.

First off I don't think anyones time is worthless.Second of all im in a time constraint and I was asking for help i have been on here long enough to know what a TM is im fighting a losing battle with my M1008's but that's a whole different thread on its own.As simple as it is for all of you to...

Thanks for the info been trying to use up some parts laying around this might be the direction I have to go.

Well Thanks for that info made my day :] I can never figure out the right TM which one would have the diagram and part number if you don't mind me asking.

So a Set of 1987 Chevy Silverado V10 6 lug axles will fit back under an m1008, Hmmm.

Well I know this is an old thread but my Master Cylinder on my 1985 airforce m1008 has been changed at some point not sure if its right one on the truck( due to just checking the rear brakes for the first time and the shoes were on backwards from a previous owner) it doesn't have the...

Bahahah don't say things like this it will confuse the Noobs hahah.Oh and by the way I thought about using the same relay to do the same thing,Let me know how that works out and make sure to keep the smoke in hahahaha

Where are the pictures,You know we all like pictures ;].

Mark,I to ran into a similar problem and I fixed my original cucv steering column 3 times and they are just old and warn out and parts are getting harder to find for them.So I found a 89-91 Chevy suburban Column with tilt and replaced both of my columns with those and I have had the tilt column...

Well I have done away with the resistor off the fire wall on both my M1008's(fire hazard if you ask me my daily driver one caught fire and the other one got really hot so I presumed they were bad just saying) and both start fine now that I have run a battery cable from my GP solenoid to the 12...

No Doubt,Welcome To SS from Good ole Eastern NC You have entered the madness. :]

I am I live right outside Jacksonville :] whats up.

Actually its not but it can be tough to find,Gm offered a lot of Gasers with idiot lights and I found that the housing is pretty much the same the diffrences are the style of speedo and changing the circuit board on the back so far so good for me and I haven't had any issues its doable also you...

make sure you fashion a License plate light to they may try to get ya on that:] Good luck and post some pictures.This Crowd Loves pictures.:]

WoW,Sounds rough My thoughts are with ya my friend I hope you get well and come out on the top.Though my truck wasn't a military truck in 2004 I had an 87 Chevy stepside I had built and spent a lot of money on.Long story short I went thru a battle with the insurance adjuster and I ended up...

I have a 90 suburban steering column in my m1008 and I love it.Its one of the best upgrades I have done.

I bought the napa one(Twentyninetyeight)$450.00 you can best believe I will be using it if I junk it out and it was a direct bolt in and had it in for almost 2 years and no problem