Search results

Should be a round black buckle fixture on the outside top. The inside strap wraps under the cover when rolled up and hooks onto the clasp.

Awesome! Let me know, thanks.

I should be there also. Anyone have a step for a front bumper they want to part with? I'm gettin a little tired of ripping the seat out of my pants trying to get a leg up to climb up on the bumper/fender to open the hood.

When you say you changed the oil, do you mean you also changed the filters? Meaning you think the filters were bad?

I have heard that the anti-drainbacks still leak and do not hold all the oil in the filter. If you don't run your truck for a while, the oil seeps back and the filters are empty. Over time, the seals in the antidrainback also fail and they are just normal filters. Anyone else experience this? I...

I have heard that the anti-drainbacks still leak and do not hold all the oil in the filter. If you don't run your truck for a while, the oil seeps back and the filters are empty. Over time, the seals in the antidrainback also fail and they are just normal filters. Anyone else experience this?

I like this T-handle style and also tried one this way but have not installed. My only concern was the body of the grenade is very thin, it only allowed for about three threads when tapped. Have you noticed any issues with stripping, looseness, damage to the end of the shifter or play due to...

Where your center two hang down loose, I just attach them to the hinges on the tailgate directly below. Works fine.

Additional pics

The following is how I made my shift lever knob using a standard surplus pineapple training grenade. I elected the following method using a tap to make threads into the grenade as it allows me to change shift knobs easily should I want to go to something different and is not permanent...

I have a brand new in the box soft top if you're interested. It's tan though.

I bought a rubber diamond pattern grill mat from Costco for $13. It was less than an 1/8th inch thick and could be shaped/cut with a razor knife. Cut in half, it fit perfectly on both sides. Have not had a water/moisture issue yet. Was cheap and easy.

Great turnout! Was nice to see everyone as well. TKRESS1 nice truck. I didn't get a chance to get up close and personal, if you get down again hopefully I can check it out. I threw an alternator belt on the way to breakfast, luckily the truck has 2 :) and made it back no issues other than...

T - 6 days

I'm in, probably order the same thing as always too. Python you wascally wabbit, where you been?

I recommend reading through this thread if you pull the fuel pump and find the bottom fell off. http://www.steelsoldiers.com/deuce/24628-tank-pump-failure-pics.html

Should look something like this.

Yes, correct. The straight pieces.

My uprights are all 45" long. Everything fits perfect.

Interesting. I would like to know this also. I just had to replace a 4 year old battery which had a dead cell, wouldn't hold the required amps, probably due to sulfation. They prorated the battery for me so it only cost me $37 to replace, however I am also wondering if this stuff regenerates...