Search results

Cloth Dryer sheets work good, (bounce) learned that from Mom

Storeman, I am sorry that I did not ex plane what I did with the wires, I did not have ant wires hooked up, in fact I will today, I was just reading volts where you hook the wires to the copper nuts and reporting what volts were there when the Unit was running. I am hooking it up like you say...

Update!!! Unit 2 is up and running, it was the reconnection switch for sure, Dad and I took it out and a little WD-40 and worked it until it clicked in all positions, put it back together and we have power!! I just wanted to say thank you for all your help, now if I can be brave enough to mess...

Let me apologize for not explaining what MEP's I have, they are both 002A's. Unit one is leaking diesel from the IP pump where the bottom left Allen bolt is. There are four Allen bolts in a square and each one has a wedge/spacer behind it and the diesel leaks out from the bottom left one where...

I have had bad luck with the last 2 MEP's that I have won. Unit one (900 hrs) generates the right voltage and runs like a champ but it has a bad fuel leak from the IP pump that drip/runs on the oil filter, Anyone had that problem and anyone know if it can be fixed by a so-so mechanic? I bet it...

Try "Car Quest" that is where I get mine from

Got to try her out, worked like a charm!!! 48 head of yearlings

I don't know about that, That is a old Model 93 Winchester, good rifle.

I wish I had my camera when I put the hitch in, We took the bed off and put a 8 inch piece of channel iron across the frame from driver-side to passenger side and inside of that is a smaller piece of channel with the "nut" welded to it and then it welded to the 8 inch channel, then flat strap...

Built a headache Rack, goose-neck hitch and note the horseshoe D-rings, now our CUCV is a bonafide Ranch pickup.

We got it painted, now to put in the no slip flooring (Rubber belting cut in strips) and when I get the M931 running all will be good to go!!!

No, I have never had cattle try to climb out, but had some wild ones try to jump out in the past (but none ever made it) when we used Bobtail trucks. But they better have there A game on when they try haha.

Yes Sir Lincoln County, that is our M936, and thank you, more photos when I get paint on it and the floor done.

This is the project that my Dad I have been working on, Just about got it wrapped up today:clinto:

Welcome from southwest NM, nice truck!!

I flushed mine with diesel, but my fronts still will not pull

Right now I am building Cattle racks for a M872A1 trailer that I will ether pull with my M818 or M931, photos coming soon as I can remember to take my camera. But I also haul a TD-15 crawler and a case backhoe.

I use 80W-90 in all of mine, hope this helps

I am having the same problems with a new to me M931, it was running when I shut it down for the night and the next day it will not even turn over, It was overcharging when I shut her down and now I am scratching my head wondering what I do next? I put 4 new Batteries in her, I get my guages to...

That has to be the worst luck trip I have ever hear about, I feel for you, all I can say is better luck next time!!