Search results

Thats great. I asked for a pic from overdrive not a comment from you. You seem to have a comment about everything I post lately since I our trading of PM over the interior units. If he doesn't want to post a pic thats fine.

Overdrive can you post a picture of the bracket?

It isn't yet. I don't want to turn this into a classified so please PM me with any interest. Once I know it is picked up from the base I will be listing it in the classified section. Hwhomes, You need a Compressor, Compressor bracket, all of the hoses, the Condeser, Dryer, and all the wiring...

I won 2 AC units made for these trucks last week. One will be for my truck and one will be for sale. It is just the cab piece but the rest I am sure I can piece together.

Got to use the plow this weekend. The truck is a beast and pushed everything I put in front of it. I set the CTIS to sand and have a 3,300 lbs block of concrete right over the rear axle. I never had any tire spin or slide when on the brakes. It did take a bit to get use to having that much...

Kambaku, I would love to see pics of your finished interior. Hwhomes, The door panels and headliner look great. I am going to do the same this spring along with a complete repaint and installing air conditioning.

Same as Augdog.

I doubt it. They are the center section of the dash in an LMTV/ FMTV. It is only the blower motor heater core and evaporator.

Thats awesome on the progress. Would love to see some pictures of the interior as this sound like a similar route i am going to go with mine.

I just won a pallet of 4 LMTV AC units from Warner Robins Ga. I need them transported to Sandyston, N.J. They are on one pallet now and weigh a total of 240lbs.

After a little more searching and it seems to be refered to as a lube cup orifice.

Quoted from another forum. "and 2wd needs the oil plug swaped out on the 3 oclock position with the tail housing off. 4wd needs a solid plug. 2wd has pin hole to lube the bearing in the tail housing. "

It didnt happen. Whent to my local trans shop to pick up the parts to do a rebuild and conversion he told me about the plug. He was the one that said it would cause problems and fill the case if not changed out and had the plug to give me. Like I said it was 8 years ago and I have trouble...

Wow great find. I would be interested to see pricing on other covers they offer.

Those tires would be Supper Swamper Boggers by Interco tire. Google Search For Supper Swamper should bring up a ton of suppliers.

I have done a 4L80 2 wheel to 4 wheel conversion and also bought no specific tools. It was about 8 years ago so not sure on the specs you are looking for. The one thing I do remember is that there is a plug between the case and tailshaft housing. On a 2 wheel drive there is a pin hole in it...

I would say it looks servicable. Remove the four allen head screws and clean it. Probably some debri stuck in it and won't let it seal off.

Thanks. Got my chains hung on the truck so I always have them and they are out of the way.

I have a set a chains for the rear if I need them as well as a 3000 pound concrete block for ballast.

Here is the plow mounted. I finaly got the cargo cover on now just need some rubber rope to tie it down. Also mounted up all my LED lights on the cab and around the perimeter of the truck. There is some wiring left on the plow to figure out to get the headlights to work. I think it is a bad...