Search results

remove clip pull cable back and cable should slide through the slot in the big bracket

the cable should slide throught the slot in the bracket

That's funny 2 different diagrams same part you just beat me to it lol

should be an E clip holding it on # 13 in diagram

Hi I was wondering if anyone can tell me the dimensions of the Cargo cover bows for the 2 man cargo cover. I am getting a cover but don't have the bows I was just going to bend them out of conduit. I think 3 are one length and front is a bit shorter. Was wondering if anyone had some dimensions...

If you are going to scrap it I'd be interested in the cover that covers up the wires if your new one came with one. The one on my gen is missing.

Thanks Lionel for finding out. I may try to fab something similar and tie in under floor protection with them. Action you wouldn't happen to know what the brackets look like that mount them would you?

Yeah those are the jack rails I was talking about

Thanks for the Pics BLK HMMWV!

Yeah I could think of much better things to buy with 3K. I'm hard pressed to drill holes through the Rockers but I suppose it would be better than smashing it again. How do the H1 protectors mount would I need to drill holes? I was thinking of just making Jack rails out of angle that would I...

To do it the right way probably goin to have to pull the head and replace the head gasket and get a heads checked to hope it's not cracked. Maybe start by getting a coolant pressure tester and see how bad it is leaking down

To do it the right way probably goin to have to pull the head and replace the head gasket and get a heads checked to hope it's not cracked.

Has anyone fabed up any rock sliders or rocker protection. I was doing some research and saw jack reinforcement rails which may work but was looking to see what others have done to protect their rockers and posiably protect the floor also. I know they make ones for civi h1's but kind of...

I just recently installed this one on mine. I modded an old GPS mount and old rear view mirror i had laying around. No permanent mount and is in the middle-ish in front of the wiper motor. So glad I did it. Wish I did it sooner. It vibrates some at lower speeds under throttle but noting bad and...

So weird mine did the same thing after I thought the top wasn't on far enough. Pushed it down to far it was choking itself. As soon as I moved it back up and tightened it down no more whistle. Hope that helps and I explained myself well enough

Well not the entire thing lol but have certainly used it to help solve some of my issues with my truck. Lots of good info.

Mine just blinked fast when I got mine I have the older Natron Box a new glow plug controller solved my issue. Check out TM-9-2320-280-20-1 has great info on testing including a ohm test for the controller. mine ohm'd out bad so I replaced it and that solved my problem. Better than just...

Does your volt meter drop to the yellow also when it clicks? What PCB/EESS do you have? You may meed a new one or a new Glow Plug controller/Temp sensor since no Wait light. There is a ohm test procedure for the controller in TM-9-2320-280-20-1. TM's are your best friend.

They're ridged industries A-Series LED lights

Yea that's the part number I originally provided. But I wanted to get it done sooner than later and sourced the seal locally. kit was like $8 The seal kit came with o-ring too i assumed it was for the adjuster and did not use it. Here's some pics of how I replaced the seal. What it looked...