Search results

long time since i posted up . . how you guys doing these days ? i am fabbing up a set of bumpers for a friends blazer and he wanted painted bumpers over chrome so i scored a set of military take off's and he wants some led lights in place of the black out lights . any one do this mod and find...

ya but is this the whole system or just the boom winch for flow . ? i understand the 2500 psi . but trying to check flow rate to see if stuff is working as it should .

scanned threw and didnt see specifics on the crane boom winch stuff for flow/psi

does anyone know off the top of there head what the hydro flow gpm and psi is on the winch for the boom on a m936a2 wrecker ? thanks guys .

thanks [thumbzup]

any good current filter part# for this location ?

if so then i will wire / zip tie / tap them open . . . thats crazy . and why hide these so far under the truck when you can get to the 2 tanks under the cab so easy .

ir temp gun at its best job . x2 for this test . 1 of the best tools to buy ever .

you must have not read my other posts . . . i figured it out . but here is the pics of the 2 ball valves on the 3rd tank hidding up inside the frame by the t-case and BIG pto pump .

so kind of long story here but its fixed for little more than $1.50 for the test fitting and 2hr of my time and a few helpful hints from here . so I flip flopped the 2 hoses on the tanks . this got me air to the fan system line and sec air gauge working . but I lost primary gauge function ...

o.k. who ever installed the self tap bolts that hold the hose clamps to the body must have a special skinny socket . so for testing I decided to hand trace out the 2 hoses cause if its bad I am not removing the old one . I will get a new one and a bag of zip tie's and sister it to the old ...

we have a full hose shop 5 min from were the truck is at now . so if hose is bad then we can get a new one no problems . well I guess I will go pull the hose and check it out now . will post back up when I find the problem . thanks for the help :grin:

o.k. both power switches on & off tested . upper hose off = no air flow . lower hose at tank = crack loose lots of air hiss . didn't remove 100% as tank is full psi . upper air tank under pass side cab = full air and tank drain screw open lots of air . lower tank under cab = no pressure...

so the other week we were playing with the wrecker and she overheated a bit . 2 gal lost from boil over . . let cool down and she seems fine . no loss of coolant since . well before shut down I popped the hood and the fan was not spinning . we were using the rear pto for the crane / drag winch...

i have a civi k30 i bobbed down due to rusted rear frame rails . its now around 110" wb and it rides on light duty 3/4 ton 56" rear springs not stock k30 springs . its great for plow duty with balast weight but i dont care for it this short . flatbed is 5ft long . took 3ft off it . you can...

well then this one is a 936a2 wrecker . . . . so what temp you guys thinking ?

bump this old thread . . . anyone use this unit yet ? the truck at work overheated the other day when using the crane unit . the fan was not on on the running engine. I have a male/male 6jic fitting on order to test it . but if it needs a new switch this looks the best .

mabye a idea is build a conversion hitch for the trailer to make it pintle . i think it was on this site 1 time i saw a goosneck trailer with hay bales that was behind a truck with pintle hitch . he had 2 pin points at the header of the trailer and made a A-frame to clip in to them and pick...

figured . just wanted to make sure thanks ! :beer:

so what if for now we just put in valve cores on each tire were the ctis hose goes on . then fill them up to the 80-90 psi range and reinstall the hose to keep crap out of the system . then unplug the electrical connector on the control box at shifter tower . will this be a o.k. delete or is...