Search results

I put in a head liner with speakers and Radio. I have really liked it. You need to be certain that you can read your radio from a upward angle.

The one that your looking for is marked as a 20 amp on the top left side (second from the top) under the hazard lights. It is marked engine con. The other fuse box i found had a 25amp fuse in it

I took the gen #1 and #2 off and the new one I picked up too the rebuild shop. They tested them again there. Gen #2 and the used one are both reading good. So I am getting the old gen #1 rebuilt for a spar. Auto zone did not know how to test a generator with an external ground. I also found two...

Thanks Joe. I am not certain that the tester was turning at Idling speed. I had took it off and put it on a belt driven tester in the store. It was probable turning a lot faster than the 6.2 at ideal. I am not certain it was 17 volts on the good one there was a mark on the gauge between 15 and...

My Generator One light does not come on until I rev the engine. Then it comes on and will not go back off until I turn the engine off and then start it again. I had the drivers side altanator tested on the truck and it did not show charing on the battery at the front of the truck. I took the...

I got a rear sliding window at pull a part for $14.

I used short self tapping screws to mount the highlinger in the truck.

I put a over head liner (Highliner) from LMC in my m1008. I really like it. It also has built-in speakers system(it is the same price to buy it with the speakers or without and there pretty good) It is a little pricy (269.95) and made for the truck but I am certain you can make it work on your...

Thanks Guys, I would have already posted what I found out with the fuse replacement but I have been at the hospital for the last two days and will be here again tomorrow with my father.:| I will have to check it at the first of next week. I will down load the correct maintenance Manual asap joe...

I pulled most fuses one at a time and then replaced them looking for a bad one but I might have missed on. I will double check it after I get back from the state wrestling Tournament tomorrow night or first thing Sat morning. Thanks for all the info again. I will let you know if the lower 24v...

I will change the IGN Fuse this weekend, and see if that is it. Does anyone know anything about another fuse box on the truck? I found a pick of one for a m1010 but can not find one on my truck. Thanks guys for all the help.

It is my Gen 2 light. The voltage meter is not working at all. Is there a way to test the voltmeter relay?

I have a 1985 CUCV M1008 and have been having a hard time running down wiring problems (the last two owners have altered some of the wiring:evil:). I found the on line manual and on page 4-13 there is another fuse block for a m1010. Do I have the same fuse block on my M1008? and if so where the...

I found a really cool on line manual if anyone ever needs one. The read lines you see on the pages take move you around in the manual. http://brochures.slosh.com/cucv/tm9-2320-289-20.pdf or http://www.wheelindixie.com/forums/showthread.php?t=69 I hope this helps the next guy.

A Manual would be great. I was on line looking for one right before checking back in on the sit. One of my friends that is still in the service check and said they changed everything over to computer manuals and threw away the old books a few years back. I thought I had seen a computer write up...

If my wait light is not working right now can I still do this? Is there a way to check the card? and where is it

this might answer my Q. I have been putting Radio my 1985 cucv m1008. I am really not a election and this 24 or 28 volt system (I have read that its a 28 volt somewhere) is throwing me for a loop.:evil: I believe I am having grounding problems. :?: I had some problems with getting the head...

Thank you for the info. I will check out the K5 sit

I have a 1985 CUCV that i just got up and running. It is a beast with stock 235 85 r16. I am really wanting to lift this truck. I have looked at different listings about this topic and talked to a few off road shops about lifts. I was wanting to go with a 38" tire I would like to keep it thin...

Hello man, I live in knoxville and just got a 1985 m1008 CUCV and have another friend in Morgan Co with another 1985 m1008 CUCV.