Search results

Retired Warhorse I now have power I just wiggled some wires at the plug that goes into the glow plug control box. With that alternator should the battery cable come directly from the starter since it’s a 100 200 amp or should it go from the starter to the box to the alternator as it currently...

Here is what someone else said in another form which I just found out. Now I need to confirm if I have a 200 amp or a 60 amp alternator I know someone change the motor In vehicles with the 60 amp alternators there is an 8 gauge wire (5A) that runs from the alternator output stud to the control...

So the schematic is incorrect. The wire goes from the alternator to the glow plugs start box. Looks like I have a short wire that’s right at the plug that goes into the box. Sent from my iPhone using Tapatalk

From the diagram the fuse looks to be on the alternator but wondering if it may be mid way as I have power in the wire where it comes up from the bottom but after it goes around the intake before the alternator it looses power. Was wondering if it could be a bad wire or if fuse is mid way. Was...

Hello wondering if anyone knows if there is a Fuse-able link between the starter and alternator. I have power at starter and half way up the wire on the motor to the alternator but no power to the alternator. Wondering if there is a fuse able link in the wire loom before I cut it up to look for...

Regardless as previously stated it was a sacrifice move intentionally designed this way. Sent from my iPhone using Tapatalk

Start up cost is 90,000 per sos. Also sos has hundreds of plates just like the Detroit tigers plates that just came out. Plates are now printed vs pressed. Either way that’s a mute point as the plate will be removed from the bills as a sacrifice move as was planned. [emoji41] we are just waiting...

Sounds good. I don’t plan on using a hammer as the last person killed the other pulley. Thank you for all your guys help. Sent from my iPhone using Tapatalk

Thank you I will have to look for one of those. I’m guessing you had to hold the pulley with a vice or something to keep it from turning while you torque it down? Sent from my iPhone using Tapatalk

That comment wasn’t directed towards you. I do understand that you are trying to help and it’s greatly appreciate. I agree that someone that originally put it together probably caused the failure from the looks of the pulley. Waiting on new pump and pulley to arrive[emoji846] Sent from my...

Your back lol, funny how it’s different to remove the pulley from a normal power steering pump since it doesn’t have the lip on the pulley but rather use a steering wheel puller which worked perfect. People are here to help other people and not to try and berate them. Funny Sent from my...

It’s already removed, looking to see how to install the new one Sent from my iPhone using Tapatalk

So I have the old power steering pump off and waiting on new parts. Anyone know how to install the new pulley? Do you just force it on with the bolt in the middle? Any tricks or tips on what to watch out for? Looks like someone beat the heck out of the old pulley to possibly install so I ordered...

Guess I got very lucky, was stressed out and didn’t know what else to try. Thank god it was bad. Sent from my iPhone using Tapatalk

What I did last night was I disconnected the high-pressure line from the power steering pump and I was able to hold my finger on the high-pressure line so I am assuming that my power steering pump must have went bad even though it was working before I replaced the gearbox. Sent from my iPhone...

Hello I had my steering gear box off for a few days and replaced with a new one. I turned the wheel left and right 100 times but I still seem to have an air in line issue as steering is hard unless you hold the brake down for a while then steering gets easier. I searched all over and can’t seem...

I agree and this is why we are working on legislation not just for civilian use but for farmers businesses and commercial usages. We should have legislation here in Michigan in process this month or early next month. I know you may be from another state but we ask everyone’s support. Please...

Feel free to send me a private message. I have all your details. Or if you give me your phone number I can call you tomorrow. Sent from my iPhone using Tapatalk

Just replacing the handle is easy Sent from my iPhone using Tapatalk

Do you like the top? What’s a good price for one that’s in good condition maybe a few chips but no cracks or hardware? I have a chance to purchase one locally for 1,500 Sent from my iPhone using Tapatalk