Search results

http://www.gemplers.com/product/182084/1000R20-Radial-Approved-Truck-Inner-Tube-TR78A-Valve#TAB-INFO Is this the correct inner tube for 395/85R20 tires?

I have not drained the fluid only topped off.

I printed the differential carrier section of tm 9-2320-361-34 and 34p. It tells you how to set up the ring and pinion. The gear mesh might be set up wrong in one or more of my axles. I will pull all three and set them up correctly. What is the best way to lift the carrier group out of the axle...

I have been trying to hunt down and fix an irritating whining noise. Found many treads on this. None have fixed the problem. The truck makes a whining grinding noise at 40mph or greater. First I thought it was the output shaft of the transmission. So I put all new ball bearings in the trans...

Took 2 weeks to pull transfercase, buy parts, have them shipped, buy arbor press, rebuild, paint, reinstall. Cost about $1000. Still whines. LOL. replaced all bearings. used SKF 6210zz c3 for the low range gear. c3's have larger clearances and a higher rpm rating at 8500rpm. set end play of...

Took 2 weeks to pull transfercase, buy parts, have them shipped, buy arbor press, rebuild, paint, reinstall. Cost about $1000. Still whines. LOL. replaced all bearings. used SKF 6210zz c3 for the low range gear. c3's have larger clearances and a higher rpm rating at 8500rpm. set end play of...

Droped both drive shafts. There is a rattel comming from the parking brake drum. It can be seen flopping around. There is a bit of end play on the rear output shaft. Does not whine at any speed. tryed applying parking brake to make a load but the brake stabalizes the shaft. Pulling transfercase...

Is there a source for transfercase gaskets? What is the part number for a kit?

Maybe a chipped tooth? Open the top cover and check it out.

5/16th bolt with 1/2in bushing threaded into old brake shoe pin hole. Used .015 feeler gauge to set adjustment of shoes. The whine got better. W00T! No longer sounds like a Wookie. But same high pitched whine still exists. Looking like it might be transfer case. Going to pull drive shafts and...

I agree. You would not be able to hear this whine over the passenger operating the machine gun. LOL. It is louder than normal operating whine i believe. Parking break is missing a pin for the U shaped separating spring. Opps. Should have check there first. Going to piece some hardware together...

Drove with the back window open this week. Sound is louder back there. Might be the transfer case. investigating.

Which bearings did you replace and how much did you spend? I have a shopping cart will all the bearings in it. It totals 975 dollars!

Have a whining noise 40mph and above. Pulled trans. Replaced the 3 ball bearings with a higer load rating and the pilot bearing. Spent 10 hours and 200 dollars on this job. It still whines. Help. lol

I plan to come if I complete the truck by June.

4 hour drives from Moline. closer to Peoria. Capital City Crawlers 279 county road 106 Fulton, MO 65251 Badlands Home Badlands Off Road Park 3968 North Xavier Attica, IN 47918 70 miles from Moline. north of Coralville :)...

Located in Moline, IL. A rally sounds fun. I would be willing to travel 120 miles. Having to drive for more than 2 hours might get lame.