Search results

Hey luckydog good find. Just read your post.What is the Onan P/N for the valve cover gasket. I am looking to get a few spares and if I can get them at a reasonable price all the better. metalworker393

Thanks guys, I might have some time to tinker with it this week after work. metalworker393

hello and how is everone doing. I have an 002 that I have been working on in my spare time. The engine was a train wreck when I got it, it ran but horribly. I managed to pick up a spare engine that came out of Kuwaitt, has new paint on it but not sure if it was rebuilt. So here's my issue. Did...

Gulf coast trucks. I purchased a few parts from Tom and didn't have any problems. Seemed to me like a good fella to deal with.

Tach for genset Thanks guys for all of your help

Hello all and hope everyone is having a good summer. I would like to tach my genset (002) and would like to know what are you guys using. Anything better than another , appreciate your help in selecting the right tool for this. metalworker393

Right size generator Hello and how are you. I was reading your post and thought I would chime in. Last year during Irene I lost power as well. Only for about sixteen hours so it wasn't that bad for me. I have an 002 that I use for backup power, and it powered my house just fine. When i got up...

Have you looked into the trucks up at Kublo's? He's up in Brackney PA, you could go and look at one of many pay for it come home get insurance and tags for it have someone drive you back up there and drive it home. Both of my deuces came out of Chambersburg and after the run around with...

SWEET! You did one heck of a job on those machines.

Mep 003 crank issue Thanks for the tip. I took a relay out of an MEP 112 that I have to try to eliminate that. The starter lockout switch does not have a cover on it,wasn't there when I picked the machine up. The wires were soldered onto the connections on that switch. I guess if I put a jumper...

Hello everybody and how are things going. okay I need some help with my 003. I can't get my 003 to crank,did the continuity test on the master switch with an ohm meter and that passed. I took the cover off of the K3 relay and the K2 relay. When I turn the master switch to crank or start if you...

Generator selection Hello and good day to all. Reading your post reminded me of myself about two years ago. My area was getting ponded by snowstorms and I was having that unsettleing feeling of being without power in the dead of winter. Plus the telephone pole in front of my house has been...

Mv insurance Hello and how are you. I did ge the title for my 71 duece from GL, and yes that was painful. When I went to change the GL title (it was a Florida title) It took me another 6 weeks to get the NJ title. I also bought a 72 M35a2c through GL. This time, the time getting the tiltle...

Mep starting issue Hello and hope thinga are good by you. Reading your post and I had a similar problem last year with my 002. Turned out to be the starter lockout switch was out of adjustment

MEP injection pump Hello all and how is everyone. I was reading this post for a little guidance on an issue I have with an 002 I am working on. I was able to get this machine to run briefly on Saturday but have a few other issues.On the right side of the IP, the linkage is sticking and will...

Mep 112 Thanks Speddmon

Hello all SS members how are you. I am looking at the MEP 112'S going off at Chambersburg PA and was wondering if anybody has gone up to look at them. I have an 003 with a dead engine and was thinking that the 112's would be a good replacement.Not much use for a 400 hz generator that I am aware...

Prelube pump Thanks for the responses guy's.I don't want to bypass any of the safety set points it's just cranking it for 15 seconds or so makes me cringe.Maybe a tee off the oil drain and get a small A frame or AA frame gear pump mount a 24 volt electric motor to it?How about that.

Hello everybody,hope everyones Thanksgiving went well.So I have a question maybe someone could help me out. I start my 002a genset the first weekend every month and run it for a half an hour to make sure everything is working.Here's whats killing me.I start cranking it and it seems to want to...

Frequency meter Thanks for the help everybody,I'm getting 120 across the lugs in a 240 volt configuration so I'm thinking my engine speed is in the ball park.I'm going to ask my supervisor if I can borrow the companies strobe light to see how close the rpm's are.An electrician I work with said...