Search results

Hello everybody,hope everone is well.Okay,so I need some direction.I have one of my 003 gensets running,getting good oil pressure and no smoke.Getting 120 volts across both legs.Now my problem.How do I go about checking the frequncy meter and/or the transducer?The needle just hangs at the 55 hz...

Woo Hoo, can't wait to see them!

MEP 002 & MEP 003 engine rebuild kit Isaac have a question.If the piston design is the same between the civillian and military just diffrent outside diamiter, could the military block be sleeved to use a civillian piston?Just a quick thought.

Hello all and how is everybody doing.I recently picked up 2 002 gensets and 2 003 gensets.I have only 1 of the four that will turn over but havn't started it yet.(003)The other 003 is siezed up,and will not turn at all. Of the two 002 units,one turns by hand a little rough.I put some marvel oil...

Mep 002 starting problem Hello all,think I found the problem.I was checking diffrent items that could have been the problem.I removed the cover from the starter lockout switch opened up the points with my inger to make sure they weren't stuck together and moved.I turned it to start and the...

Mep002 starting trouble I don't think it's the starter.I jumped it out last night and it cranked the engine over.It still wouldn'y start though.I was wondering if the float switch for the auxillary fuel supply was tied into the starting circut so as not to allow the machine to be started unless...

Hello all and how is every body? Okay,I need a little guidance with my 002 genset. I came home from work today and wanted to change the oil in my genset before it got dark.I went outside to start the unit up and let it warm up and couldn't get the starter to engage.I am getting the selenoid to...

welcome aboard Welcome aboard princess from Monroe NJ.Would be nice to see some other MV's cruising the Jersey roads.Have fun,metalworker393

fuel return line fitting Hey Mikey how are you.This is metalworker393,not too far from you.I was reading your post about the fuel return line and figured I might be able to help a little. Often on industrial machinery that is subject to viabration they use heavy duty compression fittings...

Hello all SS members,happy Easter,Passover and anything else you want to celebrate. Okay,I'm looking to get some information on replacing my rocker panels.They are both rotted through and was wondering if anybody could help me out with this. I see Memphis Equipment sells the replacements...

Smokey deuce Hello and how are you.I was reading your post about the smoke and wanted to just chime in a comment. My deuce was smoking pretty badly and I had thought that maybe I was in need of changing out the injectors,so I decided first to poke around at some other possibles .I pulled the...

MEP utility outlet Hello and how are you.I have two MEP 002 gensets.One running,and the other needing some help.Last night I decided to check my running unit out and found the utility recepticle was not getting any electricity.I removed the side cover and spotted two wires taped off. I went...

wiper motors Thanks for the input,appreciate your help.metalworker393

Hello all ss members and good evening.Well the wiper motor gremlins are at it again.I have already replaced my air operated wiper motors and now I am having trouble again. My motors are the plastic type,are the metal ones any better?Secondly,I am now suspecting that the real problem may lie in...

Hello all SS members,I have an M35a2c that I am looking to convert to 12 volts from 24 volts.Anyone out there able to post a schematic on how to do this?Electricity is not my strong point,and I intend on adding some 12 volt accessories to my truck. Of the things I want to do,add a hydraulic...