Search results

just got euc on this truck...fuel pump fuse burned..didn't have another fuse so I tin foiled the fuse after ruling out a dead short..., pump runs,,,fuel pressure on filters at filter drain ....but engine won't start..???....tank was empty...do I need to bleed air out of the system?..... some...

either starting........ I have been driving heavy diesels for 30 years....retired from the teamsters..worked for a Chicago company where is does get cold.. K & R Delivery,if you are old enough and from Chicagoland.you may recognize the name......the reason it says to inject the either "while...

I sure appreciate all the ideas and help from you guys....thanks....William H from SDiego hit the nail on the head.....I tested the springs in the oil pressure regulator and they were in spec....so I put it back together and removed the oil pressure sender and screwed a gage in the side of the...

Run It... Aye, Aye...........

I have never run this over 2000 rpm....I have changed the oil and filters...15w40 rotella...when I picked up the truck I started it and the oil pressure went to 30 and stayed there all the way (30 miles) at 45 mph/1800 rpm......with the old oil...I changed the oil and the pressure seemed to drop...

I am a new guy but my truck was slow to start until I opened the valve on top of the two fuel filters on the left side of the engine near the firewall and let the air bleed out....when I drained the filters air got in and was trapped there....turn on the ignition,(don't start the engine) and...

I just brought the M35A2 home a week ago tomorrow....drove 40 mph at 1800 rpm all the way...30 miles.....my son following me said his speedometer read 45....from the posts I have read I get the idea the duece speedometer may read about 10 percent slow.???...is this the general rule...

brake fluid I flushed the lines and filled with DOT 3....I'm just to cheap to pay $60 for 2 quarts of DOT 5 at NAPA.....anyway....the brakes finally WORK......the pedal hits hard about 1/3 the way down....and the wheels slide in gravel.....so I am a happy camper so far with DOT 3....I will rig...

where can you buy brake parts and surplus brake fluid for the M35A2 ??

flushing brake system what do you use to flush the brake system that will not degrade the cup, oring, seals in the brake system.??

what can I flush the brake system with that will not degrade the cups, orings, seals in the braking system.

I went to pick up my M35A2, didn't know you should use silicone brake fluid.....had the dot 3 stuff.....had to add some to get the brakes to work......now I find out that I should have used silicone.....what are the consequences,?? it has been 1 week,,,, can anybody tell me what I should do...

oil filter for lds 465 engine I found the cross reference table on this website...duh...

can anyone tell me where to find oil filters for the lds 465 engine.??....my NAPA store doesn't have a book for that , or can't find it..??? what filters do I need.. and what is the number on the muffler that Napa is supposed to carry that will work on the M35A2.??

re: did get SF97 when did this happen.???

Is there a way to tell the year of manufacture of this M35A2 from the vin # ?? Vin # 04M40669032524730

sf97 If there were enough of us together a class action lawsuit would be appropriate.....would be a sure win.....we are taxpayers,,,,,bought these trucks new and paid for them.... now bought them again and because of the arrogance of GL.....may not get a title...this is just not right.....in...

inspection no, I was in a car.

location Trenton, Ohio

title for duece Thanks to all for the reply.....I did understand that they say no SF97 will be issued.....but to sell a motor vehicle in Ohio without a title is illegal according to my lawyer buddy.....but who and how to go about getting the sf97 is the problem....GL doesn't own the vehicle the...