Search results

prices ya the prices are good there are 30 more 5 tons and half dozen dumps coming up all from the hawaii national guard, after this run no more. no one here likes or has room for these 5 tons all that were on GL here went for under $2000 great condition

I just won the bids on 2 M923 and a M936a1 wrecker now i got 2 werckers and more 5 TON owners here now, this was the only M936A1 here. One M923 has supper singles as the wrecker also for the price of shipping tires i got the hole truck 1100 the other 1500 but the wrecker was 6k8) now i have to...

compressor question anybody? i just picked up a M52A1 1969 tractor and there is no air hiss for the brakes, when i start it up it only will only show on the gauge less than 30 psi and when i rev it up it will go up then back down. i changed the governer hoping it was the problem but was not, i...

mrap rims question and advise i think these are MRAP rims with CTI on them here is the link and these will not fit on a five ton ************* Mod Note; Links to active auctions or Craigslist ads are prohibited. Please review the rules.

pls rims mod can you explain to me what you have to do to make the rims fit for 5 ton, i know the hub hole is larger than the five ton, do the bolts line up? the only thing i can think of if the bolts line up is to weld a insert to slim down the hole to the five ton hub? these rims are on...

cool tow vid you guys are lucky you can drive down the road like that i cant even try that in hawaii busted in a heart beat nice vid.

compressor Do you have any ideas on what to look for if the compressors do not go bad, some one told me to crack the line and see if air is moving and check the governer,i have to start downloading the TMs for the mac motor.this one is diffrent than the multifuel.

thanks you guys i kinda been busy but still trying on th side to fix the wrecker (M62) i was going to get some calipers and go under and measure the race and shaft up and get a bearing, it would be nice to get a number and go purchase it and install it. now i couldnt pass up this one M52 for...

i see you have a M-62 i had a question for you, on your M62 wrecker did you have any problems with the turn table pionion bearing that rotates the hoist it has the hydralics connected on the little gear that will connect to the big ring gear? mine is smashed into little chunks i found a...

i dont know any thing in hawaii is big bucks i want the duce but not the tank ,i asked the guy if he would sell it without the tank, he said every thing goes as one for the first time in years DRMO has 9 five tons now waiting in there yard and there cherry, i hope no one bids them up .

pic of the fuel truck/ look what if found there not to good was trying to take a pic of my son just found this tractor mulitfuel today also in the mountains of kunia he says it runs great for 1500 im drewling i hope he got this still cause im going for it

I Found M49 duce and a half fuel truck was wounder what thay go for its in good condition, new tires also low hours little rust cracked windshield clean little rust on fenders, soft top good condition thay want 5k and wont buge.

Dose any one know what kinda rims these are? and if you know will thay fit on a 5 ton .

dose any one know if you can run the stryker rims on a 5 ton , i know the center is larger hole than a five ton rim, is it safe if it bolts up.

Thank your a life savor, now i need to find some place in hawaii for that bearing or have to mail order it, so hard to get things in paradise. Thanks, cal

if i can get the specs if you could pass on the specs for the bearing from your org book that would be great.

thanks thanks found the break down in the manual.

My M62 has massive paly and jerking movement in the trun table, so when i took off the deck plate cover the hydraulics move this shaft in a clock wise and counter clock wise motion,the shaft was popping out so i went under and opend the cover and the bearing was in pices , look like it was a 3-4...

does any one know if can you run 395x85x20s on a m62 wrecker with hemitt rims

M62 hoist cable done broke off i found some TMs for the M39 Sieries but says it a crouped file when i down load it, but any ways does any one know how to get the cable out of the hoist spool? i read it takes 90 feet or so i have never worked on a wench i can see it goes into the drum i have...