Search results

The trailer has extension air line hoses that will reach the pintle area.

You may want to bring a 1-1/8" socket and breaker bar to possibly adjust the lunette ring for your M915. I "lowered" my trailers lunette ring to the very bottom on the trailers lunette ring mount and it is about perfectly level. My truck is 50" from the ground to the top of the frame rails if...

Like this; -6

Bravo Paul, a wise decision, you will see... Does not your M915A1 have gladhands right there at the rear pintle? If so you should be fine. If you do not have gladhands at the very rear you will need to make extensions from the pogo area. My M916 has gladhands right there at the pintle, I...

I do not know but I would suggest they will work w/ a civilian truck if all is wired status quo. Please tell me what the clearance light on the convertor box is for! I think it has something to do w/ civilian use. (You will see what I mean instantly when you arrive at your new trailer and...

Paul,

The hydraulic tank has a filter. Well two of them. It is a Style "B" #K0 40812 by Donaldson. http://www.donaldson.com/en/ih/support/datalibrary/000706.pdf Looks like is has a serviceable breather element and I think a pressure gauge can be added, I think it would indicate a high pressure if...

Plus you are not inflating the air bags....

It weighs 7000 pounds Paul. If you bring a 7 pin (round pins ) electrical connector you can make the lights work w/ the civilian connection I believe but the brakes are air over hydraulic. I have a Ford F-250 SuperCab w/ 460 and my brakes are UpGraded to an F450 system under the hood and I would...

So they so not fall off. Apparently they are not affixed well.

Paul does yours say "10 15" stamped it the Lunette ring mount on the top?

Paul you are going to be Impressed! These things are off the hook cool! I am not sure if it was mentioned or not but the little lawn mower batteries they use come w/ POS on the left on some and POS on the right on some, make sure you duplicate what is there or you will moving wires. Take...

If anyone cares; I want a place to hold my container GUIDES that is SOLID and Secure. Lots of him-hawin' later I decided to deck the front w/ 1/2" Aluminum. You can't put huge wait on the front corners of these trailers anyways. You see the oblong holes and slits in this deck I drew, I will...

Has anyone identified the axles and their components?

Anyone that wants to see how to quickly and easily lop off the Lunette ring mount w/ a skillsaw just click HERE.

I am SO FREKING happy Happy HAPPY! (Duck Dynasty Rules) I got my motor runnin'! *** Indeed the Fuel Stop Solenoid was inop. The engine should start if you remove the Solenoid, mine did not. I pulled the Fuel Injector pump as described in the ASSEMBLY DISASSEMBLY pdf I linked to in this...

RUSTY! Welcome to the club! Thanx for the input. But did you see the pic I posted w/ the GUIDES (Black triangle deals) mounted to the front of a container and in use? They are to ease the transistion from flat to angled ramp and, the weight of the container does not drag on the runners, it...

I found the KENR6226 = Disassembly / Assembly manual for our engines HERE. Can someone help me look for Perkins Manual KENR6942 please?

Electrical Shutoff solenoid U85206452 for Perkins 402D 403D 404D 404C 403C 12V Search the above on Ebay if you want to save some $. This stop solenoid seems to be a frequently purchased part for these engines, I suggest it is not if, but when yours will fail.

Here is the link to go buy all the literature they have available for the Perkins Engine. https://perkins.midlandcorp.com/Products/ProductSearch.aspx I finally figured out why I was having an issue w/ that page. Everytime I went there I read it but I was not selecting ENG for "ENGLISH". Ha...