• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. M

    i need help with the year and model

    It must be like a 58 then... the first series of numbers are just saying its a pickup then the last is the year as long as its between the start and end right? We got the bed working today on it just have to replace some hydraulic lines and it should work out pretty good. I was looking through...
  2. M

    i need help with the year and model

    We just got this jeep in the shop, it has a hydraulic dump bed on it. I was wondering if anyone can help me on the year of it. It runs good, you can barely even hear it running. It was two pumps on it, one for the plow and one for the dump bed.
  3. M

    need some help with a willys jeep

    Thanks guys, i checked and there isn't a data plate or anything, there probable was at one time but not no more. I think i am going to check with a fabricator that we have near here and see what he could make up. bobm, thanks for that offer but i think i might try and see if i can fix her up...
  4. M

    need some help with a willys jeep

    I recently got this off my uncle and i can't figure out what the year is or anything The body is really rough but it starts and runs really good. I will probably be looking for a body for it pretty soon. If you guys could help i need to know the year and where to start looking for a body...
  5. M

    Lots of Wrecker owners on here!

    here is our m543a2, i still have to get a picture with the chrome stack.
  6. M

    M125 Wrecker is MINE!!!

    congrats on the new purchase, Steve from Highpoint is a good guy and his equipment is nothing but the best, good luck with it.
  7. M

    towing coverage

    I think that you will have a hard time finding a motor club to cover your vehicle, the motor clubs only pay the service provider a percentage of the call so once the service provider knows what has to be hauled he might just turn it down. AAA and cross country have medium towing for the motor...
  8. M

    10 Ton Arctic test

    I kinda feel a little dumb now, I got one of those with my wrecker and thought that it would somehow go onto were the controls are for the boom. I never could figure it out, and now i know why. Thanks for the pic and that truck sure does look good. The next time i think i know what something is...
  9. M

    What are these for

    Thanks ddoyle
  10. M

    What are these for

    Thanks, i thought you guys would know what they were. Now does anyone have any pics of the towbar. My wrecker came with a different version of it. and just to make sure the stabalizers for the boom (the very long heavy ones that extend) are just for the boom and are nothing to do with the flat...
  11. M

    DIY Bedliner stuff

    We have used duplicolor in the past on one of our wrecker beds, then we switched back to raptor liner. It can be tinted to what ever color you want. When we redid the inside or the m543a2 we used it and it has held up really well. Also with our wreckers the raptor liner has always stood the...
  12. M

    What are these for

    When i bought the m543a2 these came with it, I really am not to sure what they are for but I know that you guys probably do. Also when using the snatch block for the front or rear winch where do you guys attach to the wrecker, the only thing that i found were those little shackles on the...
  13. M

    My M543A2

    here is a picture of the towbar
  14. M

    My M543A2

    The truck does have a tow bar on it, but because of the wheel base and the fact that it only goes 50 mph it will mainly be for recoveries. We have a 20 ton freightliner that handles pretty much anything heavy but in the winter we get a lot of snow so this should be able to help out and get some...
  15. M

    Recommendations for a good epoxy primer? tips?

    RE: Re: Good undercoat We use alot of matrix systems supplies, They have a good epoxy primer. What we usually do is use the black epoxy then go over the epoxy with a filler primer (2k) then we block it out and fix any imperfections. Then you can thin out the epoxy and use it as a sealer. The...
  16. M

    My M543A2

    We are on m13 just north of linwood rd, if don't see it out there and the shop is open just stop on in. I will check on the tire size this morning, i do know they are firestone.
  17. M

    My M543A2

    Thanks guys, Maddawg these pics are of the same truck before and after. And yes i would agree about the dewalt decal on the before pic
  18. M

    My M543A2

    well, i got most of it done besides some little things that i have to do one the weekends. I ended up nameing it after my grandpa leonard Ballor or as he said it "st. Len" , he was in world war 2 and died last year. I know a lot of you guys like to see them in army camoflauge but these are the...
  19. M

    m62 wrecker in Michigan

    Your right i looked at the tag it said m543a2 and it is a multifuel. The tag says its manufactured by kaiser. citizensoldier i think i sent you a pm, if not let me know
  20. M

    m62 wrecker in Michigan

    finally took some pics of it this afternoon. let me know what you think
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks