Search results

That seems to be fine for me at this time.

So I have it broken down I think as far as I can (see pic). Do I need to go further or can I?

What parts did find broken beside that part we have in common?

So i finally got it apart and found the problem. Looks very familiar. Now how do I fix it? Does anyone have a lead on a new one? I know one of ya welded it together. What kind of welder and any pointers if i take that rout?

Ok so it moves ok it may have been stuck but not enough it wouldn't move. So anyone have directions on how to get the part off without a pressing tool?

Whats everyone using in place of the pressing tool?

So as I am taking mine apart I see something I dont think is correct and could be the problem. In the pics below you should see what I am talking about the shaft is on the wall and does not look like its free to move up and down. Any thoughts. If not i will hit the problem sometime.

Thanks I will put more into it if I cam.

Thanks! I got the cap off but the valve under it wow its on good. Thought maybe thats why it was not coming loss. Thanks let me know Rob

The the Valve holder #32 in the manual picture reverse thread?

I am going to attempt to break it down keep ya updated.

I am not seeing that part in the diagram on page 7-32 of manual TM5-6115-584-34

So i got it off! I found after i took it off the leak i was concerned about in my first post... it appears to be an oil line that oils the pump. So it looks like this is just a bad fitting nothing crazy. Now what should i look for with the pump that would tell me it failed or why it failed?

This weekend i am going to try and take it off and apart. I am going to get all the information together i can and see how it goes.

Thanks so much! I will take it apart asap.

I am wondering if that is also why i have that leak coming from that peace described in my first post. I am wondering if i broke something like what you are describing inside. What instructions did you use to take that pump off? I don't want to make things worse. lol I think i am at the point i...

Ok so i did what you said i think this time lol. I pushed in the (picture attached) arm with the arrow all the way up until it hit the stop screw on the injector pump. Still no fuel. Thanks Rob

Ok i think i did this correctly. I pulled the throttle all the way out on the unit. I then tried to start it, when the solenoid pulled it up i took at screw driver and tried to raise it higher. It did not go any higher and no fuel was coming from the out ports for the injectors. When i mean...

Ok just like everyone i have issues, well i always have issues i mean with the mep002a. :) Issue 1 I am leaking, i think oil but not sure off of the bolt that sits on top of the injector pump and behind it a bit. see pic below Don't know if this has anything to do with the next issue or not...