Search results

just so you know if you look close see there's a small thin piece of rubber that protects the aluminum from the steel Sent from my SAMSUNG-SGH-I317 using Tapatalk

Here is how I mounted a set on mine. FYI Sent from my SAMSUNG-SGH-I317 using Tapatalk

Ebay purest brand worked for myself. Sent from my SAMSUNG-SGH-I317 using Tapatalk

https://shop.servicecaster.com/6-x-2-Phenolic-Wheel-p/scc-phr620.htm Sent from my SAMSUNG-SGH-I317 using Tapatalk

I built mine to put a controlled load 78% to 120% for break in. The ease of controlling with a load bank is the best way IMO Thank you Sent from my SAMSUNG-SGH-I317 using Tapatalk

I would look for a old ac air handler. Modify with the 3 20k heat strips each on separate breaker. Use the blower, remove the coil. I have seen a libby load bank on ebay awhile back for 900. Almost pick it up. But it was more k than I needed. Sent from my SAMSUNG-SGH-I317 using Tapatalk

Or above I mean Sent from my SAMSUNG-SGH-I317 using Tapatalk

12V DC 20GPM Gasoline Fuel Transfer Pump Gas Diesel Kerosene w/ Nozzle Kit The blue one pictured below? Sent from my SAMSUNG-SGH-I317 using Tapatalk

Okay everyone all these transfer pumps everybody's using who's had one working for more than 2 years with no problems please have a model number for reference greatly appreciated . Thank you! Sent from my SAMSUNG-SGH-I317 using Tapatalk

Being I got mine with 11hrs I just changed oil to JD break in oil After checking with DB. changed coolant ( came out clear green) Oil filter (wix) new fuel with Stanadyne performance additive Quad winding mods. And have been load banking hard to get to 100+ hr mark. Everything going great...

How many hours did you have on your generator before changing yours? Thank you, Sent from my SAMSUNG-SGH-I317 using Tapatalk

Great, I haven't try to remove the one on my 803a yet. Not sure I want to :( I will definitely take in concideration everyone experience here. I have destroyed some oil filters that have been over tightened before with the same results. I now AWAYS start high on the edge where It is...

Anyone here have a good recommendation for a fuel water separator to hang on 55 gallon drum for added protection? Thank you, Sent from my SAMSUNG-SGH-I317 using Tapatalk

The fitting on this adapter in the picture fits the factory mep803a auxiliary fuel line? Sent from my SAMSUNG-SGH-I317 using Tapatalk

is this the same type bung fuel adapter? Sent from my SAMSUNG-SGH-I317 using Tapatalk

Where did you purchase your bung and Inlet tube for your tank setup? Sent from my SAMSUNG-SGH-I317 using Tapatalk

I did purchase an mep803a. At the time purchasing I thought the four cylinder was a much smoother operating machine. it's a little over calculated for power demand for these big power available military units. was debating whether to go back to a 5K 802 or just run the extra load. In the...

I reviewed some of your videos I believe on YouTube. you're running them that without any load, that's not really recommended correct Thank you, Sent from my SAMSUNG-SGH-I317 using Tapatalk

Is that fuel usage rating at 75 or 100%? Thank you, Sent from my SAMSUNG-SGH-I317 using Tapatalk

I your opinion does the 1040 run as smooth as the 803a? I have not seen a 1040 in person but videos I've seen looks as if there is more vibration on the 1040.almost like the 802a. Thank you, Sent from my SAMSUNG-SGH-I317 using Tapatalk