Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
You will drive right by me if you take 85 South. I am about 2 miles off exit 212 Dabney drive in Henderson NC. There are other mods that could be made to transfer but unfortunately that will make it cost more as well.
If this sounds interesting and you want drawings or more info I am 1 to 1 1/2 hrs south of you on 85 and would be glad to show you what I am talking about we have industrial equipment that uses these kind of devices just not on a deuce,:-D I think most of the parts could be had on ebay cheap...
How about a slide out hoist/chair. After he stands and opens the door he pushes the button that releases the air cylinder in the cab roof and lets the trolly with winch and seat slide to the edge of the door frame. A simple hand control for the winch drops the chair/ seat to the ground. He sits...
You could try putting trans fluid in a spray bottle remove the air cleaner and fog the intake while someone turns over the starter. When I had a problem getting my filter to charge I did this and kept it running long enough to fill the filter and IP.:-D
Once you pull the filter it will take quite some time (cranking) for it to refill with diesel. You may choose to replace it with the walmart setup (30$ in the boating section) it offers a spin on filter and thus you can prefill it. This make filter changes a breeze.
Or just replace the assembly with a spin on filter from Walmart( boating section) under 30$ and filter change is easy and cheap (7$) and longer lasting IMO. With the square ones I had to crank my starter for a long time to get them to fill and you can prefill the spin on ones. It took about...
Best way I have found to clean a STEEL radiator is muratic acid. It will remove lots of crud quick just never use it on Aluminum or plastic. I use 100% flush for 5-10 min then drain, flush with water, flush again with water. Then put in new coolant. Aways wear cloves and eye protection. Muratic...
If the head is salvagable I may be able to use it to replace the 400HZ genset I have. If you'd be willing to part with it.:-D Sorry for your loss though.
This is the OFFICIAL ONE MONTH COUNTDOWN! Below are some helpful suggestions for you of things to bring, rules and general info we want you to know. Neil and I may add to this as we get closer! We can't wait to meet you all.
STUFF YOU WILL NEED!
1 Any camping gear you might need...
Engine driven centrifuges require you to fill your tank first then filter. Mine and Avengeusa run off of an electric motor allowing you to store good processed oir for blending in a drum and then you don't have the issues with water or other contaminants if the engine driven centrifuge is...
There is also the Mid Atlantic Rally rally at Uharrie at the end of June. http://www.steelsoldiers.com/upcoming-events/30709-official-nc-rally-uwharrie-june26-28-a.html?highlight=official+rally...
Heater can mount under the passenger seat. I have a coolant run heater in my M109... I put it in last winter and have not had a chance to test here in NC. Good luck on the hardtop, I don't see many that are in good shape for sale often.:-D
If anyone wants to buy my old 1009 filter unit (working unit) they are welcome to it for 35$ just PM me with your details. It will come without the base just the entire filter unit...I may even have an old filter laying around with some life left in it.:-D
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!