Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Ok so the NC Rally is on and Neil has laid the ground work by getting the site and covering the deposit (yes we need to chip in and pay him back). This thread is about who is coming and how many people you are bringing including vehicles. The site has room for 30 people and about 10 vehicles. If...
Our company cuts sandscreens for use in sanding wood floors and also makes abrasive scrub pads if you are coming through NC on 85 stop in Henderson (exit 212) and I will be glad to give you guys some of my scrap 60-400 grit sandscreen!:-D We also have LOTS of plastic barrels!
Kind of kidding about Uharrie we take our jeeps there...It would be a 4 lane with deuces LOL. Seriously though! NC is a more centrally located state and could draw easily from Ga to NY. If there were 3 rallies a year East Coast/ West Coast/ Central we could bounce around the states one year in...
The above thread speaks of filtering sometimes down to .5 microns, I think that takes care of abrasives. As to the used motor oil, it is a petroleum product and blended with gasoline or another thinner should run in a multifuel fine. I would not run mine on it exclusively but I see no harm in...
I agree stretch! the diesel craft runs off of oil pressure which can change the speed of the centrifuge and thus its effectiveness. When I did my research Simple seemed like the best and I have been very happy with mine. Important note in cold climates you will still get gelling of wvo. The...
Sure! I actually bought the bowl before they started making the whole deal. Then I found a guy on ebay who built the whole thing and ended up buying his unit(and trading him my bowl for a better price). While the build is straight forward enough on the unit it requires machining capacity that I...
Also standard disclaimer is( said in my best aw shucks voice) "this is what I do"...you can do what you like. I offer no warranty or take any liablity for your system. After years of running diesel vehicles on other than straight diesel (no problems) I think I have a pretty good idea what works...
No problems here is a better description. Mine is a "Simple Centrifuge". I heat the oil (with a drum heater) to about 120 deg F( less than a standard water heater) and run it through once! it is easy in my setup. 55gal drum on stand gravity feeds the centrifuge, I set it and walk away. I do...
I wouldn't, even with trailer brakes a panic stop is going to ram you in to the person ahead of you. Why not drive the deuce home like the rest of us or is it inop? Basically as said above you could... but only if you had an extremly well preped truck, trailer with brakes and a death wish, see...
Welcome to the 109 club man! also glad to have another NC Boy here on SS. If you are ever heading north on I-85 I am just a couple of miles off it in Henderson( near the Va line not the mountains):-D Thumbs up on your ride!
Amen on cleaning the fuse holder your wife or girlfriends nail file or emery board will do a great job for glass fuses for smaller car type fuses use a small flat screwdriver and fine sandpaper 400g if you can get it. My favorite trick is to use a regular pencil eraser on switches( for power...
I have a centrifuge and love what it takes out of the waste oil and wvo I run in my truck and cars. I filtered before I fuged and filters work great too. a centrifuge catches down to .5 micron which saves you money in the long run but the centrifuge is expensive mine was 1500$ but I figure I...
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!