Search results

Very detailed. Thank you. The only issue I found is R2 has 52 ohms which states it should be 510. R3 has 498 ohms which should be 510. Both my transformers are good with no resistance across the H and Xs. Would R2 be my issue?

I assumed that the A11 would be the issue when I first assessed the generator. I also assume that the K5 relay on the A5 card is an issue because both battery generation and the generator set itself have power supplied to through this relay. The schematics I look at tell me nothing to look...

I applied 120v to 18 and 22 on a5 and there is a click. I soldered in new resistor and still nothing.

So I applied 12v to a5 22 and a5 18 and nothing. But I pull the relay and test it, it works. I swapped the K1 out as well. And same thing. Also CR6 has resistance. About 500 ohms.

I will do just that but one question before I break out my laptop. 120v or 12v?

So here is what I got. On the A5 circuit board Resistor R3 looks burnt. 5905-00-357-3093 resistor is not available anywhere along with A5 board 6110-00-201-6015 . Would anyone have any information on where to find these parts?

So I was recently tasked to get this generator working. I only get 5 volts from the 120ac power outlet when I'm holding the start switch and maxing out generator speed. 50hz on the gauge. Once i release the start switch everything goes back to 0. The batteries are not charging as well. It runs...