Search results

So for the fuel system I heard different things from different people but I didn’t want to take any chances with anything that wasn’t sufficient so I used Aeromotive Phantom 340 Apex 450 with regulator and filter. After it was all said and done the fuel system listed above plus the tank and...

I do at home. I'll check after work. i noticed last night it was shorter than I thought it would be. The tank is 14" deep and it was approximately 13"

Thank you RWH

I've looked in the TM's but I cant find out if the HMMWV is equipped with a rollover valve or not. Does anyone know and if so which part is it? The white plastic thing is shown as a vent.

I have not but those appear to be Speedhut gauges. They have options just for Hummer Humvee. Check out their site.

The other gauges I had weren’t compatible with the motor so I returned them and got speedhut gauges. Before I took apart the dash I sat in the correct seat and traced where the steering wheel was on the dash so today I’m laying out the locations and drilling the holes. Getting ready to prep...

The geared hubs, wow, what a bucket of fun that was. I’ll try to remember all the things I hoped to pass along. There’s almost no information on the interweb about how to break them all down. I tried several methods to get the spindle bearings off and it boiled down to cut it off with a...

Thanks! I will

I tore a boot on a brand new ball joint and I'd like to replace just the boot. I've seen Energy suspension makes them but I can't tell if it fits the heavy duty A2 ball joints or not. Does anyone know or know of another company that makes a A2 ball joint boot? Thank you

The nut threads down onto the spindle all the way except for one thread from reaching the tab washer. I have not forced it on. I have inspected the thread with a magnifying glass and there’s no visible damage down there. I was going to buy a thread die and run over it but no one knows the...

Yeah, I plan on doing that. Thank you

Thanks! I'll sign up over there

There’s A LOT of talk about spindle nuts variations but no where does anyone I can find mention on their product or in the manuals about the thread size and pitch. I need to buy a die and chase my threads. Does anyone know the thread pitch size for the spindle

OK thanks. I thought so but I wanted to make sure I wasn't missing something and have to take it all apart.

Anyone? It's the tiny clip and seal inside the steering bracket that bolts onto the geared hub and fits over the spindle extension.

I’m not using CTIS and the seal parts were kind of expensive so I didn’t buy them. Mine are damaged so can I remove the ring clip and seal and leave them out or do they perform some other function? Thank you

Personally I’m replacing mine with a 39” Borla from a trophy truck but now I see why you never responded hahaha 😂