Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
i got a bunch of parts from a friend of mine the other day. in the pile was a box that he said was a 12 volt conversion that keeps your truck 24 volts but gives you a 12 volt poit to use for civilian stuff.
i opened it up today to inspect it and read the directions and the blueprint it came...
heres a cool M800 thats for sale in deleware. this truck is huge!! im 6'2" tall and my shoulders are even with the bottom of the bed!!
<img src="http://www.twmurray.com/vehicle_sales_photos/BED1061_8.jpg" border="0">
i do occasionally haul some heavy stuff like firewood or a truck. if i have rubbing issues, i might torch up some old rims i got outback and make a spacer for each corner in the back if i got enough wheel stud to do it safely. it would gimme atleast 1/4" more room, if not more. what do you guys...
injector pumps have very close tolerances. i have seen in a few big rig dealerships, the injector pump rebuilding guy works in a room that is maintained at a constant 75 degrees so all the parts will fit correctly during installation or repair. the kitchen sink might be a good place if ur gonna...
can i run the 11.00x20s in the back in a dual wheel configuration like my 9.00x20s, or does it have to be singled out to keep the tires from rubbing the frame. i noticed my new tires are a little wider than the 9.00x20s
my L brackets came loose out of the seat cushion, i think a screw fell out of one of them. it seemed like my seat was not attached until i futher inspected it and found missing screws and the brackets just twisted outta position
im gonna have to get ahold of him, out here in south jersey all most of us do is play in the woods. i have seen 7 deuces at once just hangin out draggin guys outta the mud at a non orgainized or advertised events in the woods. so far this is the 3rd pin i broke in 4 weeks, but its my fault for...
the trails in to where he was stuck were only really big enough for a toyota if your lucky. i got it in the head a few times form some nice tree branches<img src="emoticons/icon_smile_mes.gif" alt="Mes">and my mirrors didnt like the trip either. they were intact when i left the house. infront of...
wow, 10 for $20, thats cheap. i been payin $3.50 each from saturn surplus and i thought they were the cheapest. TNJ Murray is sellin them for $8 each. i just got a snatch block today at TNJ Murrays, the darn thing weighs like 50lbs!!!! also got a winch chain to attach to it with a clevis so i...
so i get a phone call from a buddy of mine, thats his stuck bronco on 40" tires
<img src="http://images.snapfish.com/33%3B8888723232%7Ffp63%3Dot%3E2336%3D%3A%3A5%3D%3C96%3DXROQDF%3E232363777%3A%3A%3C%3Aot1lsi" border="0">
i popped a shear pin getting him out. thats when the fun started.
<img...
i got one for ya about the neighborhood kids. some little punk thought it would be funny to unlatch the hold downs for my hood when i wasnt looking. needless to say the saftey latch is broken and my hood took off once my truck hit 50mph. it was kinda funny after it happened. i took an ammo can...
in my TM theres a section on winch testing and adjustment. it has a drawing of the winch drum if you were able to see it from the side and shows how much it will pull at the given amount of cable on the drum. at full wrap the winch is capable of only about 8,900# before the shear pin lets loose...
my brackets were tweeked. so was my frame (to much ramming stuff).
if your planning on installing the winch kit allow at least 4 days to install. it took me 6 with a cast on my leg working in a stone driveway. also make sure you get the thick gasket for the pto or make 2 gastket from gasket...
im definately gonna buy the top, im thinking of ridin down there in a week or so, before my disability time off runs out. the guys at tnj murray have alot of good stuff. their not as cheap as saturn surplus, but they have alot of stuff that saturn doesnt have.
the last time i was there jerry...
im going to buy the hardtop for my truck. i had the top off all summer cause the old one ripped. the ripps started from tree branches and kept getting worse. its so bad i cant even put the old top back on. i got a quote of $350 for a hard top from the TNJ Murray company in dover deleware. its a...