Search results

I am not sure. I got the truck from my dad and he bought it from a military surplus that's in our town it looks like a new sender. Am not sure?????. Thank your for the info warthog

It looks just like my 08 with out the lift tho. That will be coming next spring.

Well I don't have a small enough crescent wrench to fit doghead. Am sure a smaller one will work maybe I will just have to buy one

OK a crescent wrench won't fit in there. I have tryed a 1 1/6 is to big and a 22mm is to small those are the biggest I got any in sight on what size it is

What size is the hex nut on the sending unit. I been looking for it on here and the only thing I can find is the size of the threads.

Thanks warthog

My Autozone guys just do the standard parts like this for my 1986 m1008 under the 86chevy 1ton 4x4 diesel. And to help from no one stealing your truck unhook the green wire from your injection pump when you park it it won't start. Done this to my old plow truck its a ford 6.9 diesel it dont have...

Does anybody know how to remove the benches from the bed of my m1008

Allenhillview Am looking for new has soon has I find a place I will let you know

Thank you

Were can you get a pulley at. Can't seem to find one

Its new I used a install tool I bought at Autozone to but the harmonic balancer on it went on easy. And when the truck was running the balancer was not wobbling just the pulley. I will pull it back off and re install it to see if it helps any.

I replaced my harmonic balancer but my crank pulley is still wobbling when I took it off there I didn't seem to be bent or anything. Any adviceaua

I got my new harmonic balancer on and put my truck back together but my crank pulley is still wobbling what else can cause that it didn't seem bent or anything.

Thank you. Can u buy the wire used for it???

What is that round plugin used for on the front of my m1008. Been trying to find other post but can't.

Well finally got it off oh yea. Going to finish it up tomorrow. K9vic went to the link you listed glad you said to use a 2x4 to tap it on when install it. Thanks for all the info

Would it be OK to heat the pulley bolts up alittle bit to help get them off???aua

Yea I had one fine thread bolt so far and one course thread bolt. I can't get the other 2 out yet I sprayed them with some wd40 and try tommorow I can't get the other 2 pulley bolts loose I just get turning the engine over I will let you know when I get the other 2 out. And the fine thread bolt...

Anybody have any insight on how to stop the motor from turning over so I can get the pulley and balancer bolt off thank you